qmk_firmware/drivers/painter/comms/qp_comms_spi.h

52 lines
1.7 KiB
C

// Copyright 2021 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef QUANTUM_PAINTER_SPI_ENABLE
# include <stdint.h>
# include "gpio.h"
# include "qp_internal.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Base SPI support
struct qp_comms_spi_config_t {
pin_t chip_select_pin;
uint16_t divisor;
bool lsb_first;
int8_t mode;
};
bool qp_comms_spi_init(painter_device_t device);
bool qp_comms_spi_start(painter_device_t device);
uint32_t qp_comms_spi_send_data(painter_device_t device, const void* data, uint32_t byte_count);
void qp_comms_spi_stop(painter_device_t device);
extern const struct painter_comms_vtable_t spi_comms_vtable;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// SPI with D/C and RST pins
# ifdef QUANTUM_PAINTER_SPI_DC_RESET_ENABLE
struct qp_comms_spi_dc_reset_config_t {
struct qp_comms_spi_config_t spi_config;
pin_t dc_pin;
pin_t reset_pin;
};
void qp_comms_spi_dc_reset_send_command(painter_device_t device, uint8_t cmd);
uint32_t qp_comms_spi_dc_reset_send_data(painter_device_t device, const void* data, uint32_t byte_count);
void qp_comms_spi_dc_reset_bulk_command_sequence(painter_device_t device, const uint8_t* sequence, size_t sequence_len);
extern const struct painter_comms_with_command_vtable_t spi_comms_with_dc_vtable;
# endif // QUANTUM_PAINTER_SPI_DC_RESET_ENABLE
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
#endif // QUANTUM_PAINTER_SPI_ENABLE