qmk_firmware/keyboards/sergiopoverony/creator_pro
Ryan d09a06a1b3
Update GPIO API usage in keyboard code (#23361)
2024-05-03 15:21:29 +10:00
..
keymaps
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
creator_pro.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
creator_pro.h Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
keyboard.json Migrate features from rules.mk to data driven - ST (#23286) 2024-03-15 22:24:10 +00:00
readme.md

readme.md

Creator Pro

Creator Pro Layout

This Keypad has 1 rows x 9 columns of keys. It has the top/default layer that has a few 1-8 keys as well as one dedicated encoder key for change layer. The second layer has QWERASDF keys. Encoder have 4 function on any layer is Volume Control, Mouse Wheel, PageUp/PageDn, Left/Righ buttons. The keypad also includes three RGB LEDs that show active layer. For enter the bootloader to flash new firmware need press hw reset button hole on the bottom

Keyboard Maintainer: SergioPoverony

Hardware:

  • For enter the bootloader to flash new firmware need press hw reset button hole on the bottom
  • Key switch holes cut fabrication in blank PCB
  • Uses Gateron Brown switches with gray keycaps XDA profile
  • Chassis is PCB with supports
  • PCB fabrication
  • Uses a Pro Micro wint MicroUSB connector
  • Includes a reset switch accessible by a hole on the bottom

Make example for this keyboard (after setting up your build environment):

make sergiopoverony/creator_pro:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.