qmk_firmware/keyboards/mkh_studio/bully
James Young 495e83b30f
Migrate `LOCKING_*_ENABLE` to Data-Driven: M, Part 2 (#23773)
Affects:

  - `mkh_studio/bully`
  - `mlego/m48/rev1`
  - `mlego/m60/rev1`
  - `mlego/m60_split/rev1`
  - `mlego/m60_split/rev2`
  - `mntre`
  - `mode/m65ha_alpha`
  - `mode/m65hi_alpha`
  - `mode/m65s`
  - `mode/m80v1/m80h`
  - `mode/m80v1/m80s`
  - `mode/m80v2/m80v2h`
  - `mode/m80v2/m80v2s`
  - `molecule`
  - `momoka_ergo`
  - `monarch`
  - `monsgeek/m1`
  - `monsgeek/m3`
  - `monsgeek/m5`
  - `monsgeek/m6`
  - `monstargear/xo87/rgb`
  - `monstargear/xo87/solderable`
  - `montsinger/rebound/rev1`
  - `montsinger/rebound/rev2`
  - `montsinger/rebound/rev3`
  - `montsinger/rebound/rev4`
  - `montsinger/rewind`
  - `moon`
  - `morizon`
  - `mountainblocks/mb17`
  - `mt/blocked65`
  - `mt/mt64rgb`
  - `mt/mt980`
  - `mtbkeys/mtb60/hotswap`
  - `mtbkeys/mtb60/solder`
  - `murcielago/rev1`
  - `mxss`
  - `mysticworks/wyvern`
2024-05-22 11:13:39 +01:00
..
keymaps
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: M, Part 2 (#23773) 2024-05-22 11:13:39 +01:00
readme.md
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

mkh bully

Make example for this keyboard (after setting up your build environment):

make mkh_studio/bully:default

Flashing example for this keyboard:

make mkh_studio/bully:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available