Compare commits

...

330 Commits

Author SHA1 Message Date
Beaudry Chase 25027afdf4
Merge 0ee5dbc8af into e9e26c2b52 2024-05-18 20:43:44 +00:00
Beaudry Chase 0ee5dbc8af cleaned Lines 2024-05-18 15:43:16 -05:00
Beaudry Chase b50e87bf64 set momentary 2024-05-18 15:24:29 -05:00
Shandon Anderson e9e26c2b52
Add media key support to Riot Pad (#23719) 2024-05-18 21:15:59 +01:00
Beaudry Chase e93eca8b8a updated readme 2024-05-18 14:51:38 -05:00
Beaudry Chase 5c08ade1ce update 2024-05-18 14:45:52 -05:00
QMK Bot 8fac6224d5 Merge remote-tracking branch 'origin/master' into develop 2024-05-18 17:52:54 +00:00
c0ldbru d0ac04a841
[Keyboard] Add h4ckb0ard (#23717)
* adds h4ckb0ard

* Update keyboards/rot13labs/h4ckb0ard/info.json

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/rot13labs/h4ckb0ard/info.json

Co-authored-by: Joel Challis <git@zvecr.com>

* Update keyboards/rot13labs/h4ckb0ard/info.json

Co-authored-by: Joel Challis <git@zvecr.com>

* Update info.json

updating flags to indicate backlighting

* Update info.json

reduces max brightness to 100

* Delete keyboards/rot13labs/h4ckb0ard/config.h

removes this since its not needed anymore

* Update keyboards/rot13labs/h4ckb0ard/info.json

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/rot13labs/h4ckb0ard/keymaps/default/keymap.c

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/rot13labs/h4ckb0ard/keymaps/default/keymap.c

Co-authored-by: jack <0x6a73@protonmail.com>

---------

Co-authored-by: c0ldbru <c0ldbrusec@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: jack <0x6a73@protonmail.com>
2024-05-18 11:52:24 -06:00
QMK Bot a32870ea1b Merge remote-tracking branch 'origin/master' into develop 2024-05-18 17:51:33 +00:00
Danny 8f2085421e
[Keyboard] Add Irispad (#23724)
* Add Irispad

* Fix x positions for RGB LEDs

* Add encoder/bootmagic settings in info.json and run format-json

* Add missing info.json

* Fix README formatting
2024-05-18 11:51:02 -06:00
James Young 5469f30dfe
Migrate `LOCKING_*_ENABLE` to Data-Driven: 0-9 (#23716)
Affects:

  - `0_sixty`
  - `1upkeyboards/pi40`
  - `1upkeyboards/pi50`
  - `40percentclub/gherkin`
  - `4pplet/perk60_iso/rev_a`
2024-05-17 23:55:29 +01:00
James Young 924147dfe4
Miscellaneous Data-Driven Keyboard Conversions (#23712)
Converts `rules.mk` entries to data-driven where applicable.

Affects:

  - `handwired/dygma/raise/ansi`
  - `handwired/dygma/raise/iso`
  - `handwired/symmetric70_proto/promicro`
  - `handwired/symmetric70_proto/proton_c`
  - `lazydesigners/dimple/ortho`
  - `lazydesigners/dimple/staggered/rev2`
  - `lazydesigners/dimple/staggered/rev3`
  - `sirius/uni660/rev2/ansi`
  - `sirius/uni660/rev2/iso`
2024-05-17 23:54:21 +01:00
Ryan 5c592ab0c0
Delete trivial keymap readmes (#23714) 2024-05-17 23:49:29 +01:00
QMK Bot a871dab668 Merge remote-tracking branch 'origin/master' into develop 2024-05-17 22:00:13 +00:00
Dasky 47bc02b2ff
Force CPI update using timer when using split pointing. (#23545) 2024-05-17 22:59:45 +01:00
QMK Bot b1ed1c6082 Merge remote-tracking branch 'origin/master' into develop 2024-05-16 23:06:50 +00:00
Joel Challis 340be4bae3
Resolve home directory in userspace config (#23730) 2024-05-17 00:06:19 +01:00
Ryan a9ba83c7be
Remove useless `LED/RGB_MATRIX_ENABLE` ifdefs (#23726) 2024-05-16 12:52:15 +01:00
QMK Bot 38d6aa2674 Merge remote-tracking branch 'origin/master' into develop 2024-05-15 04:06:47 +00:00
George Secillano ef80077b68
Fix mapping of GUI/ALT for Win/Mac layers (#22662) 2024-05-15 12:24:27 +10:00
QMK Bot f21dc7914f Merge remote-tracking branch 'origin/master' into develop 2024-05-15 01:31:45 +00:00
QMK Bot 722dedc118 Merge remote-tracking branch 'origin/master' into develop 2024-05-13 18:21:16 +00:00
QMK Bot cfe0709fc3 Merge remote-tracking branch 'origin/master' into develop 2024-05-13 17:16:21 +00:00
QMK Bot 7778e6dcb0 Merge remote-tracking branch 'origin/master' into develop 2024-05-13 09:33:58 +00:00
Ryan f9f67d4cb3
Change all RGB mode keycodes to short aliases (#23691) 2024-05-12 10:05:11 +10:00
QMK Bot 66eb5d0a90 Merge remote-tracking branch 'origin/master' into develop 2024-05-11 23:33:35 +00:00
QMK Bot f903c7a8cb Merge remote-tracking branch 'origin/master' into develop 2024-05-11 17:26:41 +00:00
Ryan 1184e0d9be
Adjust keycode alignment around `QK_BOOT` (#23697) 2024-05-11 16:50:48 +01:00
Joel Challis 2d4832f57a
Align RGBKB keyboards to current standards (#23663) 2024-05-11 13:11:50 +01:00
QMK Bot 73f3f6e56d Merge remote-tracking branch 'origin/master' into develop 2024-05-11 09:03:46 +00:00
Joel Challis ef0734b7a6
Remove 'split.transport.protocol=serial_usart' (#23668) 2024-05-10 20:54:44 +10:00
Joel Challis 42a37577e1
Remove redundant keymap templates (#23685) 2024-05-09 12:06:21 +01:00
QMK Bot c3b06efb1d Merge remote-tracking branch 'origin/master' into develop 2024-05-07 11:52:16 +00:00
QMK Bot a69bf7af04 Merge remote-tracking branch 'origin/master' into develop 2024-05-07 09:02:46 +00:00
Ryan 224ff1d262
Normalise RGBLight (underglow) keycodes (#23656) 2024-05-07 18:36:50 +10:00
QMK Bot 18735599b4 Merge remote-tracking branch 'origin/master' into develop 2024-05-07 02:24:35 +00:00
QMK Bot 9227eaa185 Merge remote-tracking branch 'origin/master' into develop 2024-05-06 22:45:47 +00:00
QMK Bot 022979c4e0 Merge remote-tracking branch 'origin/master' into develop 2024-05-06 20:00:56 +00:00
QMK Bot 4f7fb29b76 Merge remote-tracking branch 'origin/master' into develop 2024-05-06 07:25:25 +00:00
QMK Bot 33c80be940 Merge remote-tracking branch 'origin/master' into develop 2024-05-05 10:38:59 +00:00
Stefan Kerkmann 5daae4bee9
split_util: rename `usbIsActive` to `usb_bus_detected` (#23657)
split_util: rename usbIsActive to usb_bus_detected

This follows the style rules and better reflects the intent.

Signed-off-by: Stefan Kerkmann <karlk90@pm.me>
2024-05-05 08:17:22 +01:00
QMK Bot 8db8431d84 Merge remote-tracking branch 'origin/master' into develop 2024-05-05 01:39:01 +00:00
Less/Rikki 5c90facf93
refactor: mechwild/bbs (#23373) 2024-05-04 18:36:08 -07:00
Joel Challis 5f9917856a
Fix iris via keymap (#23652) 2024-05-04 10:59:41 +01:00
Ryan b7d5a6c50b
Add new set of keycodes for RGB Matrix (#23463) 2024-05-04 16:49:19 +10:00
Joel Challis c8d1b6fefa
xiudi/xd75 - Fix backlight compilation issues (#23655) 2024-05-04 13:44:43 +10:00
Joel Challis 4c2bdf7ab0
Migrate build target markers to keyboard.json - Misc (#23653) 2024-05-03 16:13:43 +01:00
Ryan d09a06a1b3
Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
QMK Bot 5426a7a129 Merge remote-tracking branch 'origin/master' into develop 2024-05-03 05:11:58 +00:00
QMK Bot d5598eb714 Merge remote-tracking branch 'origin/master' into develop 2024-05-03 04:08:11 +00:00
QMK Bot b9834744d9 Merge remote-tracking branch 'origin/master' into develop 2024-05-03 00:43:03 +00:00
QMK Bot c3ad2e2daf Merge remote-tracking branch 'origin/master' into develop 2024-05-02 22:21:34 +00:00
Nick Brassel ac80cee9da
Merge remote-tracking branch 'upstream/master' into develop 2024-05-02 20:32:16 +10:00
Ryan 61c7c1f74c
Convert some AVR GPIO operations to macros (#23424) 2024-05-02 10:48:49 +01:00
Duncan Sutherland 7220715dd1
Remove 60_ansi_arrow_split_bs_7u_spc Community Layout (#23259) 2024-05-01 12:18:20 -07:00
QMK Bot 248096aa9b Merge remote-tracking branch 'origin/master' into develop 2024-05-01 19:02:54 +00:00
QMK Bot 5f07d3c958 Merge remote-tracking branch 'origin/master' into develop 2024-05-01 07:06:16 +00:00
Less/Rikki 4a0ffea41e
refactor: mechwild/waka60 (#23423) 2024-04-30 23:58:36 -07:00
Pavel Kroupa 1fc4bfa313
Add MacOS Czech ISO and ANSI keymaps #23346 (#23412) 2024-04-30 23:53:30 -07:00
QMK Bot ca98cdc2df Merge remote-tracking branch 'origin/master' into develop 2024-05-01 06:51:22 +00:00
QMK Bot e7d8c189f1 Merge remote-tracking branch 'origin/master' into develop 2024-05-01 06:44:15 +00:00
QMK Bot 145ec6189d Merge remote-tracking branch 'origin/master' into develop 2024-05-01 06:43:13 +00:00
QMK Bot 6de8c9a3a2 Merge remote-tracking branch 'origin/master' into develop 2024-05-01 06:36:07 +00:00
QMK Bot c18d11b57a Merge remote-tracking branch 'origin/master' into develop 2024-05-01 06:33:18 +00:00
DavidSannier c5fb6b4348
Refactoring successive press() -> release() calls (#23573) 2024-04-30 23:31:53 -07:00
Joel Challis 54c1ae55bf
Align 'qmk lint' argument handling (#23297) 2024-05-01 11:52:34 +10:00
QMK Bot 7b9a1ac4be Merge remote-tracking branch 'origin/master' into develop 2024-04-30 18:32:53 +00:00
QMK Bot e2b77e9689 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:44:24 +00:00
QMK Bot 3f9400d974 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:40:40 +00:00
QMK Bot aa68d95e56 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:38:42 +00:00
QMK Bot f91e793e85 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:37:02 +00:00
QMK Bot ebff2d0244 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:36:13 +00:00
QMK Bot 7a28c6ede3 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 17:35:07 +00:00
QMK Bot 0debba3681 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 08:54:37 +00:00
James Young dc2db0c1d4
MechKeys ACR60 Layout Updates (#23309) 2024-04-29 20:04:04 -07:00
QMK Bot e888187e03 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 02:50:58 +00:00
QMK Bot 009f67a91b Merge remote-tracking branch 'origin/master' into develop 2024-04-30 02:50:02 +00:00
QMK Bot 3e04bf5f1b Merge remote-tracking branch 'origin/master' into develop 2024-04-30 02:46:15 +00:00
QMK Bot 8ea68f5841 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 02:42:59 +00:00
QMK Bot 5fe63d4b4d Merge remote-tracking branch 'origin/master' into develop 2024-04-30 02:33:17 +00:00
QMK Bot ee178557ed Merge remote-tracking branch 'origin/master' into develop 2024-04-30 01:47:16 +00:00
QMK Bot cf07d5bcc9 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 01:40:31 +00:00
QMK Bot 2ddb320401 Merge remote-tracking branch 'origin/master' into develop 2024-04-30 01:40:02 +00:00
QMK Bot 5d6d6b3e8f Merge remote-tracking branch 'origin/master' into develop 2024-04-30 01:37:02 +00:00
chalex b4b222a6e3
gh80_3000 - Enable indicator LED functionality (#23633)
Co-authored-by: chalex <alejandrelee+magbogbro@gmail.com>
2024-04-29 18:36:10 -07:00
Danny 78a76b6c1e
Iris keymap update (#23635) 2024-04-29 23:45:58 +01:00
QMK Bot a0d43c3a64 Merge remote-tracking branch 'origin/master' into develop 2024-04-28 11:12:46 +00:00
Joel Challis a65818d929
Migrate build target markers to keyboard.json - BM (#23627) 2024-04-27 11:40:36 -07:00
Ryan 0ff53b2498
Rename `RGBW` define to `WS2812_RGBW` (#23585) 2024-04-28 00:36:54 +10:00
James Young 8f8fffc174
Data-Driven Keyboard Conversions: Mechlovin (#23624) 2024-04-27 13:58:04 +01:00
James Young 569be5951e
Data-Driven Keyboard Conversions: BastardKB (#23622) 2024-04-27 13:26:23 +01:00
James Young 0ab77cf2e5
Data-Driven Keyboard Conversions: M, Part 2 (#23601) 2024-04-27 03:17:40 +01:00
QMK Bot 82f7e7d7fe Merge remote-tracking branch 'origin/master' into develop 2024-04-26 23:29:05 +00:00
Joel Challis d333a25868
Add audio driver to keyboard.json schema (#23616) 2024-04-26 05:41:22 +01:00
James Young 42f61611e8
Data-Driven Keyboard Conversions: M, Part 3 (#23614) 2024-04-26 05:41:09 +01:00
QMK Bot 1d455fc5f3 Merge remote-tracking branch 'origin/master' into develop 2024-04-26 00:03:18 +00:00
Joel Challis e9b8929357
Migrate build target markers to keyboard.json - Misc (#23612) 2024-04-25 10:37:44 -07:00
Joel Challis 3d83b3e7c5
Migrate build target markers to keyboard.json - Misc (#23609) 2024-04-25 08:42:48 +01:00
Joel Challis b6d5cfe575
Migrate build target markers to keyboard.json - L (#23607) 2024-04-25 00:59:13 +01:00
Joel Challis 861a904924
Align NO_SUSPEND_POWER_DOWN keyboard config (#23606) 2024-04-24 22:53:58 +01:00
Joel Challis 16cca527a6
Fix WAIT_FOR_USB handling (#23598) 2024-04-24 19:33:52 +01:00
Joel Challis c8ceda461a
Remove RGBLIGHT_SPLIT in rules.mk (#23599) 2024-04-24 05:59:12 +01:00
Ryan c505ea48b3
Add haptic driver to keyboard.json schema (#23591) 2024-04-24 04:59:57 +01:00
Joel Challis d9740c9de1
Migrate build target markers to keyboard.json - Keychron (#23593) 2024-04-23 16:33:39 +01:00
Duncan Sutherland 32136afe24
Change to `development_board` (#21695) 2024-04-23 19:47:30 +10:00
QMK Bot 0786314bfb Merge remote-tracking branch 'origin/master' into develop 2024-04-23 09:39:18 +00:00
QMK Bot 4b4d024c6b Merge remote-tracking branch 'origin/master' into develop 2024-04-23 09:38:41 +00:00
James Young a1cbdf145f
Data-Driven Keyboard Conversions: M, Part 1 (#23590) 2024-04-23 04:06:24 +01:00
Joel Challis dc0095c64b
Migrate build target markers to keyboard.json - N (#23589) 2024-04-23 03:59:58 +01:00
Joel Challis e69b638756
Migrate build target markers to keyboard.json - JK (#23588) 2024-04-23 03:59:04 +01:00
QMK Bot d674724d4e Merge remote-tracking branch 'origin/master' into develop 2024-04-22 14:23:08 +00:00
James Young f387410c97
Data-Driven Keyboard Conversions: L (#23576) 2024-04-22 11:13:45 +01:00
QMK Bot 125d050761 Merge remote-tracking branch 'origin/master' into develop 2024-04-22 01:09:42 +00:00
Joel Challis 40d0512794
Migrate build target markers to keyboard.json - P (#23565) 2024-04-22 02:06:41 +01:00
James Young 191f626880
Data-Driven Keyboard Conversions: K, Part 3 (#23566) 2024-04-22 01:54:11 +01:00
James Young 69f96e1411
Data-Driven Keyboard Conversions: K, Part 4 (#23567) 2024-04-22 01:53:31 +01:00
James Young 7b96e54e8c
Data-Driven Keyboard Conversions: K, Part 5 (#23569) 2024-04-20 09:20:16 +01:00
James Young 5936a96620
Data-Driven Keyboard Conversions: K, Part 2 (#23562) 2024-04-20 09:19:11 +01:00
Joel Challis 49593dc81f
Migrate build target markers to keyboard.json - OQ (#23564) 2024-04-20 09:18:12 +01:00
James Young 5ab3b27e5f
Data-Driven Keyboard Conversions: K, Part 1 (#23556) 2024-04-19 17:25:03 +01:00
Joel Challis 1513966c38
Tidy use of raw hid within keyboards (#23557) 2024-04-19 02:18:51 +01:00
QMK Bot 4a7fdda668 Merge remote-tracking branch 'origin/master' into develop 2024-04-19 00:59:42 +00:00
James Young d0e1d36144
Data-Driven Keyboard Conversions: J (#23547) 2024-04-19 01:49:15 +01:00
QMK Bot 435aab534b Merge remote-tracking branch 'origin/master' into develop 2024-04-19 00:17:13 +00:00
Joel Challis abcaf39e6c
Migrate build target markers to keyboard.json - R (#23542) 2024-04-17 19:32:56 +01:00
QMK Bot 860c218415 Merge remote-tracking branch 'origin/master' into develop 2024-04-17 15:57:55 +00:00
QMK Bot 8e098ff49f Merge remote-tracking branch 'origin/master' into develop 2024-04-17 13:46:50 +00:00
QMK Bot 35474e19c8 Merge remote-tracking branch 'origin/master' into develop 2024-04-17 13:45:22 +00:00
Joel Challis fffe8ee75f
Remove *_SUPPORTED = yes (#23541) 2024-04-17 07:20:42 +01:00
Joel Challis 36a6f2ba3c
Migrate build target markers to keyboard.json - S (#23532) 2024-04-17 03:15:02 +01:00
Joel Challis e869c80af7
Migrate build target markers to keyboard.json - HI (#23540) 2024-04-17 02:49:17 +01:00
James Young baa6000ed3
Data-Driven Keyboard Conversions: H, Part 3 (#23530) 2024-04-17 00:36:21 +01:00
James Young 7be23a9cb4
Data-Driven Keyboard Conversions: I (#23533) 2024-04-17 00:15:34 +01:00
QMK Bot 783eb01037 Merge remote-tracking branch 'origin/master' into develop 2024-04-16 22:56:09 +00:00
Joel Challis 1d5ee895ad
Migrate build target markers to keyboard.json - FG (#23534) 2024-04-16 05:42:34 +01:00
Joel Challis abe4d9cdca
Migrate build target markers to keyboard.json - E (#23529) 2024-04-16 02:16:08 +01:00
James Young 3c9dd36809
Data-Driven Keyboard Conversions: H, Part 2 (#23525) 2024-04-15 19:22:31 +01:00
Joel Challis 9c1662f8f9
Migrate build target markers to keyboard.json - TUV (#23514) 2024-04-15 19:19:23 +01:00
James Young 2e01b67ecc
Data-Driven Keyboard Conversions: H, Part 1 (#23524) 2024-04-15 19:19:08 +01:00
James Young 130a2a31a6
Data-Driven Keyboard Conversions: G (#23522) 2024-04-15 02:09:46 +01:00
James Young bc8ff28a58
Data-Driven Keyboard Conversions: F (#23516) 2024-04-14 18:31:26 +01:00
Joel Challis 22b3cf4e91
Migrate build target markers to keyboard.json - DE (#23515) 2024-04-14 18:28:15 +01:00
QMK Bot e5e2b8a262 Merge remote-tracking branch 'origin/master' into develop 2024-04-14 13:00:48 +00:00
QMK Bot 360a53fe7d Merge remote-tracking branch 'origin/master' into develop 2024-04-14 05:12:46 +00:00
James Young 9de5238103
Data-Driven Keyboard Conversions: E (#23512) 2024-04-14 00:16:06 +01:00
zvecr 96025250d1 Fix dailycraft/wings42/rev2 2024-04-13 08:49:31 +01:00
Joel Challis 2eea2cdc46
Miscellaneous keyboard.json migrations (#23486) 2024-04-13 08:45:27 +01:00
James Young 8ad3a36fb6
Data-Driven Keyboard Conversions: D (#23461) 2024-04-13 06:33:49 +01:00
Joel Challis 43a122e050
Migrate build target markers to keyboard.json - W (#23511) 2024-04-13 06:31:34 +01:00
Ryan bbf63a8466
LED Matrix: replace backlight keycodes with newly added ones (#23455) 2024-04-13 04:15:22 +01:00
Joel Challis 6b60089fc7
Migrate build target markers to keyboard.json - 0AB (#23488) 2024-04-12 23:34:44 +01:00
Joel Challis 214e091ec2
Corrections to split keyboard migrations (#23462) 2024-04-12 13:44:06 +01:00
Linus Sjölinder 244b7143b6
[Keyboard] Add Chapter1 (#23452)
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>
2024-04-11 21:08:01 -07:00
Joel Challis 45b710f9e1
Migrate build target markers to keyboard.json - X (#23460) 2024-04-12 04:36:31 +01:00
Duncan Sutherland 8caa8674d2
Move `SPLIT_KEYBOARD` to data driven (#21410) 2024-04-11 20:22:15 -07:00
James Young cb81913d18
Data-Driven Keyboard Conversions: B (#23425)
Converts configuration definitions and rules to data-driven where
applicable. Renames `info.json` to `keyboard.json` in instances where
`rules.mk` can be safely deleted.

Affects:

  - `bacca70`
  - `baguette`
  - `baion_808`
  - `bajjak`
  - `bandominedoni`
  - `bantam44`
  - `barleycorn_smd`
  - `barracuda`
  - `basekeys/slice/rev1`
  - `basekeys/slice/rev1_rgb`
  - `basekeys/trifecta`
  - `basketweave`
  - `bastardkb/dilemma/4x6_4`
  - `bbrfkr/dynamis`
  - `bear_face`
  - `beatervan`
  - `bemeier/bmek`
  - `biacco42/ergo42`
  - `biacco42/meishi`
  - `biacco42/meishi2`
  - `binepad/bn003`
  - `binepad/bn009/r1`
  - `binepad/bnr1`
  - `bioi/g60`
  - `bioi/g60ble`
  - `bioi/morgan65`
  - `bioi/s65`
  - `blackplum`
  - `blank/blank01`
  - `blank_tehnologii/manibus`
  - `blockey`
  - `bluebell/swoop`
  - `boardrun/bizarre`
  - `boardrun/classic`
  - `boardsource/equals/48`
  - `boardsource/equals/60`
  - `boardwalk`
  - `bop`
  - `boston`
  - `boston_meetup/2019`
  - `box75`
  - `bpiphany/four_banger`
  - `bpiphany/frosty_flake`
  - `bpiphany/ghost_squid`
  - `bpiphany/hid_liber`
  - `bpiphany/kitten_paw`
  - `bpiphany/tiger_lily`
  - `bpiphany/unloved_bastard`
  - `bt66tech/bt66tech60`
  - `bubble75/hotswap`
  - `budgy`
  - `buildakb/potato65`
  - `buildakb/potato65hs`
  - `buildakb/potato65s`
  - `buzzard`
2024-04-11 14:21:32 -07:00
James Young a532d1cc5a
Data-driven Keyboard Conversions: C (#23453) 2024-04-11 16:29:10 +01:00
QMK Bot 8bbbe753fd Merge remote-tracking branch 'origin/master' into develop 2024-04-11 04:49:03 +00:00
QMK Bot 2daaaba2a3 Merge remote-tracking branch 'origin/master' into develop 2024-04-11 04:47:44 +00:00
Ryan 52d3ef0fe4
Add new set of keycodes for LED Matrix (#23432) 2024-04-11 14:14:02 +10:00
Ryan 25f608c1b4
Separate keycode handling for LED Matrix and Backlight (#23426) 2024-04-11 14:06:36 +10:00
Nick Brassel 4acdddbf48
Bodge consolidation. (#23448) 2024-04-10 19:03:11 +10:00
NoOne2246 b99143fdd2
Oneshot locked mods split transaction (#23434) 2024-04-08 12:55:42 -06:00
QMK Bot cd94664d15 Merge remote-tracking branch 'origin/master' into develop 2024-04-08 15:47:42 +00:00
Joel Challis ad8d934d3c
Tidy up default layer handling in keymaps (#23436) 2024-04-08 02:56:46 +01:00
QMK Bot 11deaf60b4 Merge remote-tracking branch 'origin/master' into develop 2024-04-06 22:57:40 +00:00
QMK Bot 061f5adc15 Merge remote-tracking branch 'origin/master' into develop 2024-04-06 08:43:49 +00:00
Joel Challis 1f3d709fcb
Migrate build target markers to keyboard.json - YZ (#23421) 2024-04-05 15:44:06 +01:00
Ryan 9fa91ad494
Rename `process_{led,rgb}_matrix()` (#23422) 2024-04-05 15:43:52 +01:00
Ryan a14c03b96e
Remove more unnecessary `quantum.h` includes (#23402) 2024-04-05 14:48:21 +11:00
Nick Brassel f8a7a6848d
Update ChibiOS submodules. (#23405) 2024-04-05 13:23:43 +11:00
Joel Challis 0696a62476
"features.split" is not a valid key (#23419) 2024-04-05 02:38:35 +01:00
Joel Challis fd17ae34ec
Tidy up keyboards/zvecr (#23418) 2024-04-05 02:38:12 +01:00
Ryan 2a25e79760
Remove deprecated quantum keycodes (#23407) 2024-04-04 15:16:27 +01:00
QMK Bot 7a939ca9b4 Merge remote-tracking branch 'origin/master' into develop 2024-04-04 06:44:48 +00:00
QMK Bot 8d8d6af124 Merge remote-tracking branch 'origin/master' into develop 2024-04-04 03:39:48 +00:00
QMK Bot e578434ba8 Merge remote-tracking branch 'origin/master' into develop 2024-04-03 23:12:15 +00:00
Joel Challis f29daff9b6
Miscellaneous keyboard.json migrations (#23378) 2024-04-03 23:14:03 +01:00
Joel Challis 62af50ceef
Fix failing keyboards on develop (#23406) 2024-04-03 14:01:30 +01:00
Ryan c635733a7f
Remove `quantum.h` includes from keyboard code (#23394) 2024-04-03 10:44:25 +11:00
DOIO2022 408f6e43cd
Change the VID and PID of the file kb38 info.json (#23393) 2024-04-03 00:36:49 +01:00
Joel Challis 73daecdc23
Fix spaceholdings/nebula68b (#23399) 2024-04-03 00:36:30 +01:00
zlabkeeb 03a3a2673d
Update 15PAD & 6PAD (#23397) 2024-04-02 20:58:31 +01:00
James Young 63bc7b63a6
Data-Driven Keyboard Conversions: A (#23379) 2024-04-02 17:45:44 +01:00
QMK Bot 38f7c6e3f3 Merge remote-tracking branch 'origin/master' into develop 2024-04-02 15:06:04 +00:00
Ryan 05731202a2
0xcb/splaytoraid: remove `CONVERT_TO` at keyboard level (#23395) 2024-04-02 15:37:11 +01:00
Ryan 1bea8b9d31
40percentclub/gherkin: remove `CONVERT_TO` at keyboard level (#23396) 2024-04-02 15:32:48 +01:00
Joel Challis 573db7a0ee
Produce warning if keyboard is not configured via `keyboard.json` (#23321) 2024-04-02 00:48:30 +01:00
QMK Bot 6f53d10960 Merge remote-tracking branch 'origin/master' into develop 2024-04-01 21:50:18 +00:00
QMK Bot 314e3fc2f4 Merge remote-tracking branch 'origin/master' into develop 2024-04-01 21:45:40 +00:00
QMK Bot 525cf0080f Merge remote-tracking branch 'origin/master' into develop 2024-04-01 21:44:49 +00:00
QMK Bot 33ddc90043 Merge remote-tracking branch 'origin/master' into develop 2024-04-01 19:32:52 +00:00
Less/Rikki a922627319
refactor: flehrad/bigswitch (#23384) 2024-04-01 10:33:50 -06:00
Joel Challis ea71945441
Align encoder layout validation with encoder.h logic (#23330) 2024-03-31 21:38:58 +01:00
QMK Bot a939ee1197 Merge remote-tracking branch 'origin/master' into develop 2024-03-31 11:24:09 +00:00
Joel Challis 5db6f7967e
Remove redundant DEFAULT_FOLDER from keyboards (#23377) 2024-03-31 08:49:47 +01:00
QMK Bot 809c5f2c01 Merge remote-tracking branch 'origin/master' into develop 2024-03-31 01:07:30 +00:00
Arthur 83625da36b
Add solid_reactive effects for MIIIW BlackIO83 (#22251) 2024-03-30 11:59:51 -06:00
QMK Bot b92bca7786 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 17:53:08 +00:00
QMK Bot c9f15cf081 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 17:49:35 +00:00
Joel Challis 04d6803b34
Remove 'NO_USB_STARTUP_CHECK = no' from keyboards (#23376) 2024-03-30 17:19:03 +00:00
Ryan 2dd406f08f
Remove `quantum.h` includes from keyboard custom `matrix.c`s (#23371) 2024-03-30 14:07:19 +00:00
James Young 76bd5142cf
Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00
Joel Challis 831deac212
Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
Joel Challis 1c8e99ca45
Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00
Joel Challis 426bb9c651
Migrate features and LTO from rules.mk to data driven (#23302) 2024-03-30 10:43:15 +00:00
Duncan Sutherland 86e7df0c2a
Remove "w": 1 from keyboards/ (#23367) 2024-03-29 21:14:26 -07:00
QMK Bot da041fcd53 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 03:46:45 +00:00
QMK Bot cf84ec0123 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 02:03:45 +00:00
QMK Bot 291b665d6a Merge remote-tracking branch 'origin/master' into develop 2024-03-30 02:01:22 +00:00
QMK Bot 01ea60a7a8 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 01:58:00 +00:00
QMK Bot 1eb24155db Merge remote-tracking branch 'origin/master' into develop 2024-03-30 01:04:52 +00:00
QMK Bot e1f905def5 Merge remote-tracking branch 'origin/master' into develop 2024-03-30 01:01:13 +00:00
QMK Bot bc3d1f4fab Merge remote-tracking branch 'origin/master' into develop 2024-03-30 00:16:49 +00:00
Ryan d0cf7b8519
Update GPIO expander API naming (#23375) 2024-03-29 16:57:21 +00:00
James Young e891109c4e
P3D Spacey Layout Updates (#23329) 2024-03-28 22:23:13 -07:00
QMK Bot 60aa0fda96 Merge remote-tracking branch 'origin/master' into develop 2024-03-29 05:20:28 +00:00
LLLKST 387a1aef8d
Add RGB lighting for the PetruziaMini (#23305) 2024-03-28 22:12:09 -07:00
QMK Bot e8d9e3955b Merge remote-tracking branch 'origin/master' into develop 2024-03-29 05:07:49 +00:00
QMK Bot 01ce77b01d Merge remote-tracking branch 'origin/master' into develop 2024-03-29 05:05:13 +00:00
QMK Bot 765fa718c5 Merge remote-tracking branch 'origin/master' into develop 2024-03-29 04:56:06 +00:00
QMK Bot 4e941c3caf Merge remote-tracking branch 'origin/master' into develop 2024-03-29 04:53:41 +00:00
QMK Bot bcc4dc4f25 Merge remote-tracking branch 'origin/master' into develop 2024-03-29 04:51:51 +00:00
Robin Carlier 42a725e355
Remove midi_ep_task from ChibiOS (#23162)
Co-authored-by: Joel Challis <git@zvecr.com>
2024-03-28 20:40:41 -07:00
QMK Bot 1d55b5e661 Merge remote-tracking branch 'origin/master' into develop 2024-03-29 03:33:30 +00:00
QMK Bot 81df9ba478 Merge remote-tracking branch 'origin/master' into develop 2024-03-29 03:23:12 +00:00
QMK Bot 3a22c4a31f Merge remote-tracking branch 'origin/master' into develop 2024-03-29 01:22:21 +00:00
QMK Bot 3a0b5d4ed4 Merge remote-tracking branch 'origin/master' into develop 2024-03-27 20:56:04 +00:00
Ryan 01be746fc4
Update I2C API usage in keyboard code (#23360) 2024-03-27 12:41:53 +00:00
QMK Bot 148d66fc9f Merge remote-tracking branch 'origin/master' into develop 2024-03-26 23:31:28 +00:00
Dasky d0ee4a1cb2
Fix rgblight init (#23335) 2024-03-24 11:20:05 +11:00
QMK Bot 38813e864b Merge remote-tracking branch 'origin/master' into develop 2024-03-22 23:30:59 +00:00
QMK Bot 9b910bbbf4 Merge remote-tracking branch 'origin/master' into develop 2024-03-22 12:13:36 +00:00
Ryan 583cde398a
Un-`extern` RGBLight `led[]` array (#23322) 2024-03-22 06:04:13 +00:00
Etienne Collin c038292c1e
Adding standard keymap for wave keyboard to fix #22695 (#22741) 2024-03-22 13:40:59 +11:00
QMK Bot c8253af773 Merge remote-tracking branch 'origin/master' into develop 2024-03-21 22:30:42 +00:00
Joel Challis ae9c5389f0
Reduce firmware size of helix/rev3 (#23324) 2024-03-21 21:54:48 +00:00
QMK Bot f497c5ee8e Merge remote-tracking branch 'origin/master' into develop 2024-03-21 05:07:35 +00:00
QMK Bot 1439e3348f Merge remote-tracking branch 'origin/master' into develop 2024-03-21 05:04:57 +00:00
QMK Bot 3c1fccbd8e Merge remote-tracking branch 'origin/master' into develop 2024-03-21 05:04:15 +00:00
QMK Bot f24b55b212 Merge remote-tracking branch 'origin/master' into develop 2024-03-21 04:54:33 +00:00
Ryan 319ac3b27b
Remove RGBLight `led[]` references (#23311) 2024-03-21 04:43:26 +00:00
QMK Bot 5b472a93de Merge remote-tracking branch 'origin/master' into develop 2024-03-21 04:04:43 +00:00
QMK Bot a729516edb Merge remote-tracking branch 'origin/master' into develop 2024-03-20 22:24:27 +00:00
QMK Bot 536b4d5cf1 Merge remote-tracking branch 'origin/master' into develop 2024-03-20 20:32:34 +00:00
QMK Bot f8b427d5ab Merge remote-tracking branch 'origin/master' into develop 2024-03-20 19:51:33 +00:00
QMK Bot 063f971177 Merge remote-tracking branch 'origin/master' into develop 2024-03-20 15:10:23 +00:00
QMK Bot 4c8f33baa4 Merge remote-tracking branch 'origin/master' into develop 2024-03-20 14:52:53 +00:00
Ryan f7cf40fa77
Add init function to RGBLight driver struct (#23076) 2024-03-18 22:03:27 +11:00
Ryan 23b7a02ebe
LED drivers: add support for IS31FL3236 (#23264) 2024-03-17 19:23:14 +11:00
James Young 47dc471bd4
KPRepublic JJ40 rev1 Refactor (#23299)
* Move `kprepublic/jj40` to `kprepublic/jj40/rev1`

[chore]

* Friendly-format `info.json`

[style]

* Add layout/matrix diagram

[docs]

* Refactor keymaps

- use four-space indent
- grid-align keycodes
- refactor to use `LAYOUT_ortho_4x12` macro

[refactor]

* Rename `LAYOUT_planck_mit` to `LAYOUT_ortho_4x12_1x2u_c`

[refactor]

* Rename `LAYOUT_planck_1x2uR` to `LAYOUT_ortho_4x12_1x2u_r`

[refactor]

* Re-sort `layouts` object

Places `LAYOUT_ortho_4x12` (the `LAYOUT_all` equivalent) first in
sequence.

[refactor]

* Add `LAYOUT_ortho_4x12_1x2u_l`

[enhancement]

* Add `LAYOUT_ortho_4x12_2x2u`

[enhancement]

* Convert `rules.mk` to data driven

[chore]

* Remove `console` and `command` settings from keyboard level

[chore]

* Rename `info.json` to `keyboard.json`

[chore]
[enhancement]

* Remove `audio` setting from keyboard level

[chore]
2024-03-17 07:03:58 +00:00
James Young 164065682e
Swift65 Hotswap Layout Name Standardization (#23288)
* Rename `LAYOUT_7u_space` to `LAYOUT_ansi_blocker_tsangan`

[refactor]

* Refactor keymaps

Updates the keycode grid alignment to better resemble the assembled
board.

[style]
2024-03-16 03:38:01 +00:00
James Young 7e39635c0a
Swift65 Solder Layout Name Standardization (#23289)
* Rename `LAYOUT_625u_space` to `LAYOUT_ansi_blocker`

[refactor]

* Rename `LAYOUT_625u_space_split_bs` to `LAYOUT_ansi_blocker_split_bs`

[refactor]

* Rename `LAYOUT_7u_space` to `LAYOUT_ansi_blocker_tsangan`

[refactor]

* Rename `LAYOUT_7u_space_split_bs` to `LAYOUT_ansi_blocker_tsangan_split_bs`

[refactor]

* Rename `LAYOUT_iso_625u_space` to `LAYOUT_iso_blocker`

[refactor]

* Rename `LAYOUT_iso_625u_space_split_bs` to `LAYOUT_iso_blocker_split_bs`

[refactor]

* Rename `LAYOUT_iso_7u_space` to `LAYOUT_iso_blocker_tsangan`

[refactor]

* Rename `LAYOUT_iso_7u_space_split_bs` to `LAYOUT_iso_blocker_tsangan_split_bs`

[refactor]

* Refactor keymaps

Updates the keycode grid alignment to better resemble the assembled
board.

[style]
2024-03-16 03:37:40 +00:00
James Young bbe0c515f8
KPRepublic JJ50 rev1 Refactor (#23294)
* Move `kprepublic/jj50` to `kprepublic/jj50/rev1`

[chore]

* Add layout/matrix diagram

[docs]

* Add `LAYOUT_ortho_5x12_1x2u_c`

[enhancement]

* Add `LAYOUT_ortho_5x12_1x2u_l`

[enhancement]

* Add `LAYOUT_ortho_5x12_1x2u_r`

[enhancement]

* Add `LAYOUT_ortho_5x12_2x2u`

[enhancement]

* Convert `rules.mk` to data driven

[chore]

* Remove `console` and `command` from keyboard level

[chore]

* Rename `info.json` to `keyboard.json`

Also deletes `rules.mk` as it's no longer needed.

[chore]
[enhancement]
2024-03-16 00:30:16 +00:00
James Young 1f8f0f70a2
Linworks FAve 87H Keymap Refactor/Bugfix (#23292)
* Refactor keymaps

- use QMK-native keycode aliases
- grid-align keycodes

[refactor]

* Correct key sequence

Moves the keycode representing the right half of a split Backspace to
the number row, after the left half/2u Backspace keycode.

Updates the keycode grid alignment to maintain readability.

[bugfix]
2024-03-15 22:36:23 +00:00
Joel Challis 14990ca5a2
Migrate features from rules.mk to data driven - ST (#23286) 2024-03-15 22:24:10 +00:00
Joel Challis 1a90337284
Migrate features from rules.mk to data driven - OPQR (#23285) 2024-03-15 22:24:00 +00:00
Joel Challis 24d824aae4
Migrate features from rules.mk to data driven - UVWXYZ (#23287) 2024-03-15 22:23:40 +00:00
Drashna Jaelre 68e8d74188
[Keyboard] Overhaul ploopyco devices (#22967) 2024-03-14 22:15:44 -07:00
QMK Bot 359cec14fa Merge remote-tracking branch 'origin/master' into develop 2024-03-15 05:10:50 +00:00
QMK Bot 020481b258 Merge remote-tracking branch 'origin/master' into develop 2024-03-15 05:09:50 +00:00
Joe Scotto add7c13d61
Update ScottoAlp handwired keyboard to 12 column layout (#22962)
Co-authored-by: Ryan <fauxpark@gmail.com>
2024-03-14 22:03:23 -07:00
QMK Bot b9d65269ca Merge remote-tracking branch 'origin/master' into develop 2024-03-15 02:00:34 +00:00
QMK Bot 24d7d0ec77 Merge remote-tracking branch 'origin/master' into develop 2024-03-15 01:45:14 +00:00
Joel Challis 01473075f8
Migrate features from rules.mk to data driven - EFGH (#23248) 2024-03-15 01:42:55 +00:00
Joel Challis 80b72487ce
Migrate features from rules.mk to data drive - LMN (#23277) 2024-03-15 01:42:33 +00:00
Joel Challis 539fa21bf8
Migrate features from rules.mk to data driven - IJK (#23276) 2024-03-15 01:42:15 +00:00
QMK Bot 16ad09299c Merge remote-tracking branch 'origin/master' into develop 2024-03-15 01:32:49 +00:00
QMK Bot c43f48f6a9 Merge remote-tracking branch 'origin/master' into develop 2024-03-14 17:53:03 +00:00
Joel Challis 63dd131d81
Refactor vusb to protocol use pre/post task (#14944) 2024-03-14 21:45:12 +11:00
Joel Challis 4bbfecae90
Infer eeconfig identifiers (#22135)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2024-03-14 21:45:03 +11:00
Joel Challis 6720e9c58c
`qmk new-keyboard` - detach community layout when selecting "none of the above" (#20405) 2024-03-14 21:24:24 +11:00
Joel Challis aea414fd82
Migrate content where only parent info.json exists (#22895) 2024-03-14 21:21:33 +11:00
Joel Challis f1a279810f
Migrate features from rules.mk to DD (#23202) 2024-03-14 03:57:48 +00:00
Joel Challis 8e5cd981e1
Migrate features from rules.mk to DD (#23247) 2024-03-14 03:56:42 +00:00
QMK Bot f217cd4657 Merge remote-tracking branch 'origin/master' into develop 2024-03-14 03:29:24 +00:00
Joel Challis af1ac6b1bd
Reject duplicate matrix locations in LAYOUT macros (#23273) 2024-03-13 23:04:49 +00:00
QMK Bot 6c95ec0c09 Merge remote-tracking branch 'origin/master' into develop 2024-03-13 07:24:52 +00:00
QMK Bot 0b6e1f1932 Merge remote-tracking branch 'origin/master' into develop 2024-03-13 07:24:01 +00:00
DavidSannier c92277a8ae
Remove unuseful layer_on() call (#23055) 2024-03-13 00:19:23 -07:00
QMK Bot 8449ad0fc3 Merge remote-tracking branch 'origin/master' into develop 2024-03-13 03:21:16 +00:00
zvecr 66060f1935 Merge remote-tracking branch 'origin/master' into develop 2024-03-13 00:30:09 +00:00
QMK Bot 1ea9f2e92b Merge remote-tracking branch 'origin/master' into develop 2024-03-12 22:52:11 +00:00
jack aa33d8ba8e
Fixup work_board (#23266)
* initial

* Update keyboards/work_louder/work_board/keymaps/default/keymap.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

---------

Co-authored-by: Drashna Jaelre <drashna@live.com>
2024-03-12 16:31:51 -06:00
QMK Bot df397a3bba Merge remote-tracking branch 'origin/master' into develop 2024-03-12 22:18:56 +00:00
QMK Bot 1f26ce7a9e Merge remote-tracking branch 'origin/master' into develop 2024-03-12 22:16:54 +00:00
QMK Bot 9b5eff5b01 Merge remote-tracking branch 'origin/master' into develop 2024-03-12 22:14:09 +00:00
QMK Bot a0e8e26a21 Merge remote-tracking branch 'origin/master' into develop 2024-03-12 17:28:51 +00:00
QMK Bot 2756912a0d Merge remote-tracking branch 'origin/master' into develop 2024-03-12 04:28:31 +00:00
QMK Bot eb1304b16c Merge remote-tracking branch 'origin/master' into develop 2024-03-10 17:40:39 +00:00
QMK Bot 67ba46f5c8 Merge remote-tracking branch 'origin/master' into develop 2024-03-10 11:24:45 +00:00
QMK Bot 95de18792f Merge remote-tracking branch 'origin/master' into develop 2024-03-10 07:04:27 +00:00
Drashna Jaelre c0dbe9a336
Add utility functions for Pointing Device Auto Mouse feature (#23144)
* Make is_auto_mouse_active() available globally

* Add mouse key tracker functions for auto mouse layer
2024-03-10 05:34:41 +00:00
Joel Challis 9f4a9d5826
Enable 'keyboard.json' as a build target (#22891) 2024-03-10 16:20:25 +11:00
Pablo Martínez c5225ab500
[Feature] Some metadata on QGF/QFF files (#20101) 2024-03-10 00:29:09 +00:00
Thibaut CHARLES 729520f302
Fix keychron q1v1 led config for iso layout (#23222) 2024-03-10 00:06:58 +00:00
jotix 461eaed7aa
[Keyboard] update Jotanck config(#23228) 2024-03-09 06:52:49 -08:00
QMK Bot 145a1eca1b Merge remote-tracking branch 'origin/master' into develop 2024-03-09 10:40:47 +00:00
Danny 1db7ff7f18
Update BAMFK-1 (#23236)
* Bump version number so VIA doesn't choke due to reconfiguration of keys/encoders

* Move rules.mk stuff into info.json, convert RGBLIGHT TO RGB_MATRIX

* Run format-json on info.json
2024-03-09 07:39:08 +00:00
Joel Challis bb691bed96
Fixes for idobao vendor keymaps (#23246) 2024-03-09 04:12:44 +00:00
Joel Challis 58c38175e6
Remove redundant disabling of features (#22926) 2024-03-09 03:05:07 +00:00
QMK Bot 5dfe2bc37a Merge remote-tracking branch 'origin/master' into develop 2024-03-09 01:27:01 +00:00
QMK Bot 42c048e08a Merge remote-tracking branch 'origin/master' into develop 2024-03-09 01:24:59 +00:00
peepeetee acfbfe0dae
Change default RGB effect for momokai keypads to solid white (#23217) 2024-03-08 13:44:26 -07:00
QMK Bot fc0b3eec53 Merge remote-tracking branch 'origin/master' into develop 2024-03-08 19:45:01 +00:00
QMK Bot d247c24e99 Merge remote-tracking branch 'origin/master' into develop 2024-03-08 15:41:09 +00:00
jack bd1f1068f7
Fixup annepro2 (#23206)
Co-authored-by: Joel Challis <git@zvecr.com>
2024-03-08 08:27:40 -07:00
QMK Bot 86f7531173 Merge remote-tracking branch 'origin/master' into develop 2024-03-08 11:24:40 +00:00
QMK Bot 7278b01775 Merge remote-tracking branch 'origin/master' into develop 2024-03-08 10:52:08 +00:00
QMK Bot 3ac9b80e2e Merge remote-tracking branch 'origin/master' into develop 2024-03-08 10:51:31 +00:00
Joel Challis c48f372c87
Migrate annepro2 away from custom matrix (#23221)
* Migrate annepro2 away from custom matrix

* LTO
2024-03-06 17:02:52 +00:00
Drashna Jaelre 83e6ddbbb4
[Audio] Add support for audio shutdown pin (#22731)
Co-authored-by: Ryan <fauxpark@gmail.com>
2024-03-06 22:02:37 +11:00
QMK Bot 045e5c9729 Merge remote-tracking branch 'origin/master' into develop 2024-03-05 16:59:58 +00:00
Joel Challis a2c23e9419
Initial 'qmk test-c' functionality (#23038) 2024-03-05 16:59:30 +00:00
QMK Bot bbeb9c1ccd Merge remote-tracking branch 'origin/master' into develop 2024-03-05 11:48:57 +00:00
QMK Bot d048de70db Merge remote-tracking branch 'origin/master' into develop 2024-03-04 19:43:31 +00:00
QMK Bot 2cace5a7e9 Merge remote-tracking branch 'origin/master' into develop 2024-03-04 19:42:24 +00:00
QMK Bot 000c1c1475 Merge remote-tracking branch 'origin/master' into develop 2024-03-04 19:40:46 +00:00
Markus Knutsson fcf906657b
[Keyboard] Add rp2040_ce option to lotus58 (#23185)
* Update keymap

Corrected OLED orientation, added autoshift status on OLED.

* Update keymap

Corrected OLED orientation, added autoshift status on OLED.

* Added make target to bottom folder

With default folder

* Update keyboards/tweetydabird/lotus58/keymaps/default/keymap.c

Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>

* Reformatted files

* Update keymap.c

Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>

* Updated name

* Added rp2040ce

* Update info.json

* Update info.json

* Added rp2040ce

* Small fix

* Update info.json

Co-authored-by: jack <0x6a73@protonmail.com>

* Update info.json

* Update info.json

* Update info.json

* Update info.json

* Update info.json

* Update info.json

* Apply suggestions from code review

Co-authored-by: jack <0x6a73@protonmail.com>

* Fixed stray char

* Apply suggestions from code review

Co-authored-by: jack <0x6a73@protonmail.com>

* Update info.json

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update info.json

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Moved LTO

---------

Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2024-03-03 10:37:35 -07:00
QMK Bot 73c4ca175b Merge remote-tracking branch 'origin/master' into develop 2024-03-02 18:20:47 +00:00
Ryan 569b0c70be
WS2812 PWM: prefix for DMA defines (#23111)
* WS2812 PWM: prefix for DMA defines

* Add backward compatibility defines
2024-03-02 17:16:47 +00:00
QMK Bot 3bf1ce5cf8 Merge remote-tracking branch 'origin/master' into develop 2024-03-02 12:23:57 +00:00
QMK Bot 7fd0201a92 Merge remote-tracking branch 'origin/master' into develop 2024-03-01 21:45:21 +00:00
Nick Brassel d5ac75385b
Fix up scanning for Djinn, post-asyncUSB. (#23188) 2024-03-02 08:45:11 +11:00
QMK Bot 7dd57f16c3 Merge remote-tracking branch 'origin/master' into develop 2024-03-01 18:04:23 +00:00
QMK Bot f983b2de14 Merge remote-tracking branch 'origin/master' into develop 2024-03-01 16:18:49 +00:00
jack 4e953f1169
Fixup mechlovin/octagon (#23179)
* initial

* replace led count
2024-02-28 19:13:04 -07:00
jack b35389317e
Fixup qk100 (firmware size) (#23169)
* initial

* further size reduction

and more...

remove rgb matrix effects
2024-02-28 11:50:04 -07:00
Stefan Kerkmann 0e02b0c41e
[Core] Refactor ChibiOS USB endpoints to be fully async (#21656) 2024-02-28 22:00:27 +11:00
Nick Brassel b43f6cb7ef
Branch point for 2024q2 Breaking Change 2024-02-28 21:52:10 +11:00
13295 changed files with 577932 additions and 589129 deletions

View File

@ -32,4 +32,4 @@ jobs:
- name: Install dependencies
run: pip3 install -r requirements-dev.txt
- name: Run tests
run: make test:all
run: qmk test-c

1
.gitignore vendored
View File

@ -37,6 +37,7 @@ quantum/version.h
# DD config at wrong location
/keyboards/**/keymaps/*/info.json
/keyboards/**/keymaps/*/keyboard.json
# Old-style QMK Makefiles
/keyboards/**/Makefile

View File

@ -119,7 +119,7 @@ MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
# Pull in rules from info.json
# Pull in rules from DD keyboard config
INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_rules.mk)
include $(INFO_RULES_MK)
@ -221,7 +221,7 @@ include $(BUILDDEFS_PATH)/converters.mk
MCU_ORIG := $(MCU)
include $(wildcard $(PLATFORM_PATH)/*/mcu_selection.mk)
# PLATFORM_KEY should be detected in info.json via key 'processor' (or rules.mk 'MCU')
# PLATFORM_KEY should be detected in DD keyboard config via key 'processor' (or rules.mk 'MCU')
ifeq ($(PLATFORM_KEY),)
$(call CATASTROPHIC_ERROR,Platform not defined)
endif
@ -335,38 +335,54 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
endif
# Pull in stuff from info.json
INFO_JSON_FILES :=
# Create dependencies on DD keyboard config - structure validated elsewhere
DD_CONFIG_FILES :=
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","")
INFO_JSON_FILES += $(KEYBOARD_PATH_1)/info.json
DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","")
INFO_JSON_FILES += $(KEYBOARD_PATH_2)/info.json
DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","")
INFO_JSON_FILES += $(KEYBOARD_PATH_3)/info.json
DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","")
INFO_JSON_FILES += $(KEYBOARD_PATH_4)/info.json
DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","")
INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json
DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/info.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_1)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_1)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_2)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_2)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_3)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_3)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_4)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_4)/keyboard.json
endif
ifneq ("$(wildcard $(KEYBOARD_PATH_5)/keyboard.json)","")
DD_CONFIG_FILES += $(KEYBOARD_PATH_5)/keyboard.json
endif
CONFIG_H += $(INTERMEDIATE_OUTPUT)/src/info_config.h
KEYBOARD_SRC += $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c
$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES)
$(INTERMEDIATE_OUTPUT)/src/info_config.h: $(DD_CONFIG_FILES)
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
$(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/info_config.h)
@$(BUILD_CMD)
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES)
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.c: $(DD_CONFIG_FILES)
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
$(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.c)
@$(BUILD_CMD)
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES)
$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h: $(DD_CONFIG_FILES)
@$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD)
$(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --include $(FOUND_KEYBOARD_H) --output $(INTERMEDIATE_OUTPUT)/src/default_keyboard.h)
@$(BUILD_CMD)
@ -505,22 +521,14 @@ ifeq ($(strip $(KEEP_INTERMEDIATES)), yes)
OPT_DEFS += -save-temps=obj
endif
# TODO: remove this bodge?
PROJECT_DEFS := $(OPT_DEFS)
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
PROJECT_CONFIG := $(CONFIG_H)
CONFIG_H += $(POST_CONFIG_H)
ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
OUTPUTS := $(INTERMEDIATE_OUTPUT)
$(INTERMEDIATE_OUTPUT)_SRC := $(SRC) $(PLATFORM_SRC)
$(INTERMEDIATE_OUTPUT)_DEFS := $(OPT_DEFS) \
$(INTERMEDIATE_OUTPUT)_DEFS := \
-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h\" \
-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
$(PROJECT_DEFS)
$(INTERMEDIATE_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) $(PROJECT_INC)
$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(PROJECT_CONFIG)
$(OPT_DEFS)
$(INTERMEDIATE_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(POST_CONFIG_H)
# Default target.
all: build check-size

View File

@ -340,7 +340,7 @@ LED_MATRIX_DRIVER := snled27351
endif
LED_MATRIX_ENABLE ?= no
VALID_LED_MATRIX_TYPES := is31fl3218 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 custom
VALID_LED_MATRIX_TYPES := is31fl3218 is31fl3236 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 custom
ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
ifeq ($(filter $(LED_MATRIX_DRIVER),$(VALID_LED_MATRIX_TYPES)),)
@ -353,7 +353,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations
COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations/runners
POST_CONFIG_H += $(QUANTUM_DIR)/led_matrix/post_config.h
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
SRC += $(QUANTUM_DIR)/process_keycode/process_led_matrix.c
SRC += $(QUANTUM_DIR)/led_matrix/led_matrix.c
SRC += $(QUANTUM_DIR)/led_matrix/led_matrix_drivers.c
LIB8TION_ENABLE := yes
@ -365,6 +365,12 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
SRC += is31fl3218-mono.c
endif
ifeq ($(strip $(LED_MATRIX_DRIVER)), is31fl3236)
I2C_DRIVER_REQUIRED = yes
COMMON_VPATH += $(DRIVER_PATH)/led/issi
SRC += is31fl3236-mono.c
endif
ifeq ($(strip $(LED_MATRIX_DRIVER)), is31fl3729)
I2C_DRIVER_REQUIRED = yes
COMMON_VPATH += $(DRIVER_PATH)/led/issi
@ -443,7 +449,7 @@ endif
RGB_MATRIX_ENABLE ?= no
VALID_RGB_MATRIX_TYPES := aw20216s is31fl3218 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 ws2812 custom
VALID_RGB_MATRIX_TYPES := aw20216s is31fl3218 is31fl3236 is31fl3729 is31fl3731 is31fl3733 is31fl3736 is31fl3737 is31fl3741 is31fl3742a is31fl3743a is31fl3745 is31fl3746a snled27351 ws2812 custom
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid RGB_MATRIX_DRIVER,RGB_MATRIX_DRIVER="$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
@ -474,6 +480,12 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
SRC += is31fl3218.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), is31fl3236)
I2C_DRIVER_REQUIRED = yes
COMMON_VPATH += $(DRIVER_PATH)/led/issi
SRC += is31fl3236.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), is31fl3729)
I2C_DRIVER_REQUIRED = yes
COMMON_VPATH += $(DRIVER_PATH)/led/issi

View File

@ -0,0 +1,580 @@
{
"aliases": {
/*
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ \ │ + │ ě │ š │ č │ ř │ ž │ ý │ á │ í │ é │ = │ ' │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ ú │ ) │ ¨ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
* │ │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ů │ § │ │
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
* │ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ - │ │
* ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"KC_GRV": {
"key": "CZ_BSLS",
"label": "\\",
}
"KC_1": {
"key": "CZ_PLUS",
"label": "+",
}
"KC_2": {
"key": "CZ_ECAR",
"label": "ě",
}
"KC_3": {
"key": "CZ_SCAR",
"label": "š",
}
"KC_4": {
"key": "CZ_CCAR",
"label": "č",
}
"KC_5": {
"key": "CZ_RCAR",
"label": "ř",
}
"KC_6": {
"key": "CZ_ZCAR",
"label": "ž",
}
"KC_7": {
"key": "CZ_YACU",
"label": "ý",
}
"KC_8": {
"key": "CZ_AACU",
"label": "á",
}
"KC_9": {
"key": "CZ_IACU",
"label": "í",
}
"KC_0": {
"key": "CZ_EACU",
"label": "é",
}
"KC_MINS": {
"key": "CZ_EQL",
"label": "=",
}
"KC_EQL": {
"key": "CZ_ACUT",
"label": "' (dead)",
}
"KC_Q": {
"key": "CZ_Q",
"label": "Q",
}
"KC_W": {
"key": "CZ_W",
"label": "W",
}
"KC_E": {
"key": "CZ_E",
"label": "E",
}
"KC_R": {
"key": "CZ_R",
"label": "R",
}
"KC_T": {
"key": "CZ_T",
"label": "T",
}
"KC_Y": {
"key": "CZ_Z",
"label": "Z",
}
"KC_U": {
"key": "CZ_U",
"label": "U",
}
"KC_I": {
"key": "CZ_I",
"label": "I",
}
"KC_O": {
"key": "CZ_O",
"label": "O",
}
"KC_P": {
"key": "CZ_P",
"label": "P",
}
"KC_LBRC": {
"key": "CZ_UACU",
"label": "ú",
}
"KC_RBRC": {
"key": "CZ_RPRN",
"label": ")",
}
"KC_NUHS": {
"key": "CZ_DIAE",
"label": "¨ (dead)",
}
"KC_A": {
"key": "CZ_A",
"label": "A",
}
"KC_S": {
"key": "CZ_S",
"label": "S",
}
"KC_D": {
"key": "CZ_D",
"label": "D",
}
"KC_F": {
"key": "CZ_F",
"label": "F",
}
"KC_G": {
"key": "CZ_G",
"label": "G",
}
"KC_H": {
"key": "CZ_H",
"label": "H",
}
"KC_J": {
"key": "CZ_J",
"label": "J",
}
"KC_K": {
"key": "CZ_K",
"label": "K",
}
"KC_L": {
"key": "CZ_L",
"label": "L",
}
"KC_SCLN": {
"key": "CZ_URNG",
"label": "ů",
}
"KC_QUOT": {
"key": "CZ_SECT",
"label": "§",
}
"KC_Z": {
"key": "CZ_Y",
"label": "Y",
}
"KC_X": {
"key": "CZ_X",
"label": "X",
}
"KC_C": {
"key": "CZ_C",
"label": "C",
}
"KC_V": {
"key": "CZ_V",
"label": "V",
}
"KC_B": {
"key": "CZ_B",
"label": "B",
}
"KC_N": {
"key": "CZ_N",
"label": "N",
}
"KC_M": {
"key": "CZ_M",
"label": "M",
}
"KC_COMM": {
"key": "CZ_COMM",
"label": ",",
}
"KC_DOT": {
"key": "CZ_DOT",
"label": ".",
}
"KC_SLSH": {
"key": "CZ_MINS",
"label": "-",
}
/* Shifted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ | │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ % │ ˇ │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ │ │ │ │ │ │ │ │ │ / │ ( │ ` │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
* │ │ │ │ │ │ │ │ │ │ │ " │ ! │ │
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
* │ │ │ │ │ │ │ │ │ ? │ : │ _ │ │
* ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"S(CZ_BSLS)": {
"key": "CZ_PIPE",
"label": "|",
}
"S(CZ_PLUS)": {
"key": "CZ_1",
"label": "1",
}
"S(CZ_ECAR)": {
"key": "CZ_2",
"label": "2",
}
"S(CZ_SCAR)": {
"key": "CZ_3",
"label": "3",
}
"S(CZ_CCAR)": {
"key": "CZ_4",
"label": "4",
}
"S(CZ_RCAR)": {
"key": "CZ_5",
"label": "5",
}
"S(CZ_ZCAR)": {
"key": "CZ_6",
"label": "6",
}
"S(CZ_YACU)": {
"key": "CZ_7",
"label": "7",
}
"S(CZ_AACU)": {
"key": "CZ_8",
"label": "8",
}
"S(CZ_IACU)": {
"key": "CZ_9",
"label": "9",
}
"S(CZ_EACU)": {
"key": "CZ_0",
"label": "0",
}
"S(CZ_EQL)": {
"key": "CZ_PERC",
"label": "%",
}
"S(CZ_ACUT)": {
"key": "CZ_CARN",
"label": "ˇ (dead)",
}
"S(CZ_UACU)": {
"key": "CZ_SLSH",
"label": "/",
}
"S(CZ_RPRN)": {
"key": "CZ_LPRN",
"label": "(",
}
"S(CZ_DIAE)": {
"key": "CZ_GRV",
"label": "`",
}
"S(CZ_URNG)": {
"key": "CZ_DQUO",
"label": "\"",
}
"S(CZ_SECT)": {
"key": "CZ_EXLM",
"label": "!",
}
"S(CZ_COMM)": {
"key": "CZ_QUES",
"label": "?",
}
"S(CZ_DOT)": {
"key": "CZ_COLN",
"label": ":",
}
"S(CZ_MINS)": {
"key": "CZ_UNDS",
"label": "_",
}
/* Alted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ │ @ │ # │ $ │ ~ │ ^ │ & │ * │ { │ } │ ° │ ^ │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ ė │ ę │ € │ │ │ │ │ │ │ [ │ ] │ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
* │ │ ą │ ß │ ∂ │ │ │ │ │ ł │ ; │ ' │ │
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
* │ │ │ │ │ │ │ │ │ < │ > │ │ │
* ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"A(CZ_ECAR)": {
"key": "CZ_AT",
"label": "@",
}
"A(CZ_SCAR)": {
"key": "CZ_HASH",
"label": "#",
}
"A(CZ_CCAR)": {
"key": "CZ_DLR",
"label": "$",
}
"A(CZ_RCAR)": {
"key": "CZ_TILD",
"label": "~",
}
"A(CZ_ZCAR)": {
"key": "CZ_CIRC",
"label": "^",
}
"A(CZ_YACU)": {
"key": "CZ_AMPR",
"label": "&",
}
"A(CZ_AACU)": {
"key": "CZ_ASTR",
"label": "*",
}
"A(CZ_IACU)": {
"key": "CZ_LCBR",
"label": "{",
}
"A(CZ_EACU)": {
"key": "CZ_RCBR",
"label": "}",
}
"A(CZ_EQL)": {
"key": "CZ_RNGA",
"label": "° (dead)",
}
"A(CZ_ACUT)": {
"key": "CZ_DCIR",
"label": "^ (dead)",
}
"A(CZ_W)": {
"key": "CZ_LEDT",
"label": "ė",
}
"A(CZ_E)": {
"key": "CZ_LEOG",
"label": "ę",
}
"A(CZ_R)": {
"key": "CZ_EURO",
"label": "€",
}
"A(CZ_Z)": {
"key": "CZ_LZDT",
"label": "ż",
}
"A(CZ_UACU)": {
"key": "CZ_LBRC",
"label": "[",
}
"A(CZ_RPRN)": {
"key": "CZ_RBRC",
"label": "]",
}
"A(CZ_A)": {
"key": "CZ_LAOG",
"label": "ą",
}
"A(CZ_S)": {
"key": "CZ_SS",
"label": "ß",
}
"A(CZ_D)": {
"key": "CZ_PDIF",
"label": "∂",
}
"A(CZ_H)": {
"key": "CZ_LSQU",
"label": "",
}
"A(CZ_J)": {
"key": "CZ_RSQU",
"label": "",
}
"A(CZ_L)": {
"key": "CZ_LLST",
"label": "ł",
}
"A(CZ_URNG)": {
"key": "CZ_SCLN",
"label": ";",
}
"A(CZ_SECT)": {
"key": "CZ_QUOT",
"label": "'",
}
"A(CZ_N)": {
"key": "CZ_SLQU",
"label": "",
}
"A(CZ_COMM)": {
"key": "CZ_LABK",
"label": "<",
}
"A(CZ_DOT)": {
"key": "CZ_RABK",
"label": ">",
}
"A(CZ_MINS)": {
"key": "CZ_NDSH",
"label": "",
}
/* Shift+Alted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ ¬ │ • │ ≠ │ £ │ ◊ │ † │ ¶ │ ÷ │ « │ » │ , │ - │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ Ė │ Ę │ ® │ ™ │ Ż │ │ │ │ │ │ " │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤
* │ │ Ą │ ∑ │ ∆ │ │ │ “ │ ” │ │ Ł │ … │ ~ │ │
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴──────┤
* │ │ │ │ © │ √ │ │ „ │ │ ≤ │ ≥ │ — │ │
* ├─────┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"S(A(CZ_1))": {
"key": "CZ_NOT",
"label": "¬",
}
"S(A(CZ_2))": {
"key": "CZ_BULT",
"label": "•",
}
"S(A(CZ_3))": {
"key": "CZ_NEQL",
"label": "≠",
}
"S(A(CZ_4))": {
"key": "CZ_PND",
"label": "£",
}
"S(A(CZ_5))": {
"key": "CZ_LOZN",
"label": "◊",
}
"S(A(CZ_6))": {
"key": "CZ_DAGG",
"label": "†",
}
"S(A(CZ_7))": {
"key": "CZ_PARA",
"label": "¶",
}
"S(A(CZ_8))": {
"key": "CZ_DIV",
"label": "÷",
}
"S(A(CZ_9))": {
"key": "CZ_LDAQ",
"label": "«",
}
"S(A(CZ_0))": {
"key": "CZ_RDAQ",
"label": "»",
}
"S(A(CZ_EQL))": {
"key": "CZ_DCOM",
"label": ", (dead)",
}
"S(A(CZ_ACUT))": {
"key": "CZ_DHPN",
"label": "- (dead)",
}
"S(A(CZ_W))": {
"key": "CZ_CEDT",
"label": "Ė",
}
"S(A(CZ_E))": {
"key": "CZ_CEOG",
"label": "Ę",
}
"S(A(CZ_R))": {
"key": "CZ_REGD",
"label": "®",
}
"S(A(CZ_T))": {
"key": "CZ_TM",
"label": "™",
}
"S(A(CZ_Z))": {
"key": "CZ_CZDT",
"label": "Ż",
}
"S(A(CZ_UACU))": {
"key": "CZ_LSAQ",
"label": "",
}
"S(A(CZ_RPRN))": {
"key": "CZ_RSAQ",
"label": "",
}
"S(A(CZ_DIAE))": {
"key": "CZ_DDQT",
"label": "\" (dead)",
}
"S(A(CZ_A))": {
"key": "CZ_CAOG",
"label": "Ą",
}
"S(A(CZ_S))": {
"key": "CZ_NARS",
"label": "∑",
}
"S(A(CZ_D))": {
"key": "CZ_INCR",
"label": "∆",
}
"S(A(CZ_H))": {
"key": "CZ_LDQU",
"label": "“",
}
"S(A(CZ_J))": {
"key": "CZ_RDQU",
"label": "”",
}
"S(A(CZ_L))": {
"key": "CZ_CLST",
"label": "Ł",
}
"S(A(CZ_URNG))": {
"key": "CZ_ELLP",
"label": "…",
}
"S(A(CZ_SECT))": {
"key": "CZ_DTIL",
"label": "~ (dead)",
}
"S(A(CZ_C))": {
"key": "CZ_COPY",
"label": "©",
}
"S(A(CZ_V))": {
"key": "CZ_SQRT",
"label": "√",
}
"S(A(CZ_N))": {
"key": "CZ_DLQU",
"label": "„",
}
"S(A(CZ_COMM))": {
"key": "CZ_LEQL",
"label": "≤",
}
"S(A(CZ_DOT))": {
"key": "CZ_GEQL",
"label": "≥",
}
"S(A(CZ_MINS))": {
"key": "CZ_MDSH",
"label": "—",
}
}
}

View File

@ -0,0 +1,580 @@
{
"aliases": {
/*
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ + │ ě │ š │ č │ ř │ ž │ ý │ á │ í │ é │ = │ ' │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ Q │ W │ E │ R │ T │ Z │ U │ I │ O │ P │ ú │ ) │ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │
* │ │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ů │ § │ ¨ │ │
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
* │ │ \ │ Y │ X │ C │ V │ B │ N │ M │ , │ . │ - │ │
* ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"KC_1": {
"key": "CZ_PLUS",
"label": "+",
}
"KC_2": {
"key": "CZ_ECAR",
"label": "ě",
}
"KC_3": {
"key": "CZ_SCAR",
"label": "š",
}
"KC_4": {
"key": "CZ_CCAR",
"label": "č",
}
"KC_5": {
"key": "CZ_RCAR",
"label": "ř",
}
"KC_6": {
"key": "CZ_ZCAR",
"label": "ž",
}
"KC_7": {
"key": "CZ_YACU",
"label": "ý",
}
"KC_8": {
"key": "CZ_AACU",
"label": "á",
}
"KC_9": {
"key": "CZ_IACU",
"label": "í",
}
"KC_0": {
"key": "CZ_EACU",
"label": "é",
}
"KC_MINS": {
"key": "CZ_EQL",
"label": "=",
}
"KC_EQL": {
"key": "CZ_ACUT",
"label": "' (dead)",
}
"KC_Q": {
"key": "CZ_Q",
"label": "Q",
}
"KC_W": {
"key": "CZ_W",
"label": "W",
}
"KC_E": {
"key": "CZ_E",
"label": "E",
}
"KC_R": {
"key": "CZ_R",
"label": "R",
}
"KC_T": {
"key": "CZ_T",
"label": "T",
}
"KC_Y": {
"key": "CZ_Z",
"label": "Z",
}
"KC_U": {
"key": "CZ_U",
"label": "U",
}
"KC_I": {
"key": "CZ_I",
"label": "I",
}
"KC_O": {
"key": "CZ_O",
"label": "O",
}
"KC_P": {
"key": "CZ_P",
"label": "P",
}
"KC_LBRC": {
"key": "CZ_UACU",
"label": "ú",
}
"KC_RBRC": {
"key": "CZ_RPRN",
"label": ")",
}
"KC_A": {
"key": "CZ_A",
"label": "A",
}
"KC_S": {
"key": "CZ_S",
"label": "S",
}
"KC_D": {
"key": "CZ_D",
"label": "D",
}
"KC_F": {
"key": "CZ_F",
"label": "F",
}
"KC_G": {
"key": "CZ_G",
"label": "G",
}
"KC_H": {
"key": "CZ_H",
"label": "H",
}
"KC_J": {
"key": "CZ_J",
"label": "J",
}
"KC_K": {
"key": "CZ_K",
"label": "K",
}
"KC_L": {
"key": "CZ_L",
"label": "L",
}
"KC_SCLN": {
"key": "CZ_URNG",
"label": "ů",
}
"KC_QUOT": {
"key": "CZ_SECT",
"label": "§",
}
"KC_NUHS": {
"key": "CZ_DIAE",
"label": "¨ (dead)",
}
"KC_NUBS": {
"key": "CZ_BSLS",
"label": "\\",
}
"KC_Z": {
"key": "CZ_Y",
"label": "Y",
}
"KC_X": {
"key": "CZ_X",
"label": "X",
}
"KC_C": {
"key": "CZ_C",
"label": "C",
}
"KC_V": {
"key": "CZ_V",
"label": "V",
}
"KC_B": {
"key": "CZ_B",
"label": "B",
}
"KC_N": {
"key": "CZ_N",
"label": "N",
}
"KC_M": {
"key": "CZ_M",
"label": "M",
}
"KC_COMM": {
"key": "CZ_COMM",
"label": ",",
}
"KC_DOT": {
"key": "CZ_DOT",
"label": ".",
}
"KC_SLSH": {
"key": "CZ_MINS",
"label": "-",
}
/* Shifted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ % │ ˇ │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ │ │ │ │ │ │ │ │ │ / │ ( │ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │
* │ │ │ │ │ │ │ │ │ │ │ " │ ! │ ` │ │
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
* │ │ | │ │ │ │ │ │ │ │ ? │ : │ _ │ │
* ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"S(CZ_PLUS)": {
"key": "CZ_1",
"label": "1",
}
"S(CZ_ECAR)": {
"key": "CZ_2",
"label": "2",
}
"S(CZ_SCAR)": {
"key": "CZ_3",
"label": "3",
}
"S(CZ_CCAR)": {
"key": "CZ_4",
"label": "4",
}
"S(CZ_RCAR)": {
"key": "CZ_5",
"label": "5",
}
"S(CZ_ZCAR)": {
"key": "CZ_6",
"label": "6",
}
"S(CZ_YACU)": {
"key": "CZ_7",
"label": "7",
}
"S(CZ_AACU)": {
"key": "CZ_8",
"label": "8",
}
"S(CZ_IACU)": {
"key": "CZ_9",
"label": "9",
}
"S(CZ_EACU)": {
"key": "CZ_0",
"label": "0",
}
"S(CZ_EQL)": {
"key": "CZ_PERC",
"label": "%",
}
"S(CZ_ACUT)": {
"key": "CZ_CARN",
"label": "ˇ (dead)",
}
"S(CZ_UACU)": {
"key": "CZ_SLSH",
"label": "/",
}
"S(CZ_RPRN)": {
"key": "CZ_LPRN",
"label": "(",
}
"S(CZ_URNG)": {
"key": "CZ_DQUO",
"label": "\"",
}
"S(CZ_SECT)": {
"key": "CZ_EXLM",
"label": "!",
}
"S(CZ_DIAE)": {
"key": "CZ_GRV",
"label": "`",
}
"S(CZ_BSLS)": {
"key": "CZ_PIPE",
"label": "|",
}
"S(CZ_COMM)": {
"key": "CZ_QUES",
"label": "?",
}
"S(CZ_DOT)": {
"key": "CZ_COLN",
"label": ":",
}
"S(CZ_MINS)": {
"key": "CZ_UNDS",
"label": "_",
}
/* Alted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ │ @ │ # │ $ │ ~ │ ^ │ & │ * │ { │ } │ ° │ ^ │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ ė │ ę │ € │ │ ż │ │ │ │ │ [ │ ] │ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │
* │ │ ą │ ß │ ∂ │ │ │ │ │ ł │ ; │ ' │ │ │
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
* │ │ │ │ │ │ │ │ │ │ < │ > │ │ │
* ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"A(CZ_ECAR)": {
"key": "CZ_AT",
"label": "@",
}
"A(CZ_SCAR)": {
"key": "CZ_HASH",
"label": "#",
}
"A(CZ_CCAR)": {
"key": "CZ_DLR",
"label": "$",
}
"A(CZ_RCAR)": {
"key": "CZ_TILD",
"label": "~",
}
"A(CZ_ZCAR)": {
"key": "CZ_CIRC",
"label": "^",
}
"A(CZ_YACU)": {
"key": "CZ_AMPR",
"label": "&",
}
"A(CZ_AACU)": {
"key": "CZ_ASTR",
"label": "*",
}
"A(CZ_IACU)": {
"key": "CZ_LCBR",
"label": "{",
}
"A(CZ_EACU)": {
"key": "CZ_RCBR",
"label": "}",
}
"A(CZ_EQL)": {
"key": "CZ_RNGA",
"label": "° (dead)",
}
"A(CZ_ACUT)": {
"key": "CZ_DCIR",
"label": "^ (dead)",
}
"A(CZ_W)": {
"key": "CZ_LEDT",
"label": "ė",
}
"A(CZ_E)": {
"key": "CZ_LEOG",
"label": "ę",
}
"A(CZ_R)": {
"key": "CZ_EURO",
"label": "€",
}
"A(CZ_Z)": {
"key": "CZ_LZDT",
"label": "ż",
}
"A(CZ_UACU)": {
"key": "CZ_LBRC",
"label": "[",
}
"A(CZ_RPRN)": {
"key": "CZ_RBRC",
"label": "]",
}
"A(CZ_A)": {
"key": "CZ_LAOG",
"label": "ą",
}
"A(CZ_S)": {
"key": "CZ_SS",
"label": "ß",
}
"A(CZ_D)": {
"key": "CZ_PDIF",
"label": "∂",
}
"A(CZ_H)": {
"key": "CZ_LSQU",
"label": "",
}
"A(CZ_J)": {
"key": "CZ_RSQU",
"label": "",
}
"A(CZ_L)": {
"key": "CZ_LLST",
"label": "ł",
}
"A(CZ_URNG)": {
"key": "CZ_SCLN",
"label": ";",
}
"A(CZ_SECT)": {
"key": "CZ_QUOT",
"label": "'",
}
"A(CZ_N)": {
"key": "CZ_SLQU",
"label": "",
}
"A(CZ_COMM)": {
"key": "CZ_LABK",
"label": "<",
}
"A(CZ_DOT)": {
"key": "CZ_RABK",
"label": ">",
}
"A(CZ_MINS)": {
"key": "CZ_NDSH",
"label": "",
}
/* Shift+Alted symbols
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐
* │ │ ¬ │ • │ ≠ │ £ │ ◊ │ † │ ¶ │ ÷ │ « │ » │ , │ - │ │
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬───┤
* │ │ │ Ė │ Ę │ ® │ ™ │ Ż │ │ │ │ │ │ │
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │
* │ │ Ą │ ∑ │ ∆ │ │ │ “ │ ” │ │ Ł │ … │ ~ │ " │ │
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴──┤
* │ │ │ │ │ © │ √ │ │ „ │ │ ≤ │ ≥ │ — │ │
* ├────┴┬──┴─┬─┴───┼───┴───┴───┴───┴───┴───┼───┴─┬─┴──┬─────┤
* │ │ │ │ │ │ │ │
* └─────┴────┴─────┴───────────────────────┴─────┴────┴─────┘
*/
"S(A(CZ_1))": {
"key": "CZ_NOT",
"label": "¬",
}
"S(A(CZ_2))": {
"key": "CZ_BULT",
"label": "•",
}
"S(A(CZ_3))": {
"key": "CZ_NEQL",
"label": "≠",
}
"S(A(CZ_4))": {
"key": "CZ_PND",
"label": "£",
}
"S(A(CZ_5))": {
"key": "CZ_LOZN",
"label": "◊",
}
"S(A(CZ_6))": {
"key": "CZ_DAGG",
"label": "†",
}
"S(A(CZ_7))": {
"key": "CZ_PARA",
"label": "¶",
}
"S(A(CZ_8))": {
"key": "CZ_DIV",
"label": "÷",
}
"S(A(CZ_9))": {
"key": "CZ_LDAQ",
"label": "«",
}
"S(A(CZ_0))": {
"key": "CZ_RDAQ",
"label": "»",
}
"S(A(CZ_EQL))": {
"key": "CZ_DCOM",
"label": ", (dead)",
}
"S(A(CZ_ACUT))": {
"key": "CZ_DHPN",
"label": "- (dead)",
}
"S(A(CZ_W))": {
"key": "CZ_CEDT",
"label": "Ė",
}
"S(A(CZ_E))": {
"key": "CZ_CEOG",
"label": "Ę",
}
"S(A(CZ_R))": {
"key": "CZ_REGD",
"label": "®",
}
"S(A(CZ_T))": {
"key": "CZ_TM",
"label": "™",
}
"S(A(CZ_Z))": {
"key": "CZ_CZDT",
"label": "Ż",
}
"S(A(CZ_UACU))": {
"key": "CZ_LSAQ",
"label": "",
}
"S(A(CZ_RPRN))": {
"key": "CZ_RSAQ",
"label": "",
}
"S(A(CZ_A))": {
"key": "CZ_CAOG",
"label": "Ą",
}
"S(A(CZ_S))": {
"key": "CZ_NARS",
"label": "∑",
}
"S(A(CZ_D))": {
"key": "CZ_INCR",
"label": "∆",
}
"S(A(CZ_H))": {
"key": "CZ_LDQU",
"label": "“",
}
"S(A(CZ_J))": {
"key": "CZ_RDQU",
"label": "”",
}
"S(A(CZ_L))": {
"key": "CZ_CLST",
"label": "Ł",
}
"S(A(CZ_URNG))": {
"key": "CZ_ELLP",
"label": "…",
}
"S(A(CZ_SECT))": {
"key": "CZ_DTIL",
"label": "~ (dead)",
}
"S(A(CZ_DIAE))": {
"key": "CZ_DDQT",
"label": "\" (dead)",
}
"S(A(CZ_C))": {
"key": "CZ_COPY",
"label": "©",
}
"S(A(CZ_V))": {
"key": "CZ_SQRT",
"label": "√",
}
"S(A(CZ_N))": {
"key": "CZ_DLQU",
"label": "„",
}
"S(A(CZ_COMM))": {
"key": "CZ_LEQL",
"label": "≤",
}
"S(A(CZ_DOT))": {
"key": "CZ_GEQL",
"label": "≥",
}
"S(A(CZ_MINS))": {
"key": "CZ_MDSH",
"label": "—",
}
}
}

View File

@ -0,0 +1,239 @@
{
"keycodes": {
"0x7810": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_ON",
"aliases": [
"LM_ON"
]
},
"0x7811": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_OFF",
"aliases": [
"LM_OFF"
]
},
"0x7812": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_TOGGLE",
"aliases": [
"LM_TOGG"
]
},
"0x7813": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_MODE_NEXT",
"aliases": [
"LM_NEXT"
]
},
"0x7814": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_MODE_PREVIOUS",
"aliases": [
"LM_PREV"
]
},
"0x7815": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_BRIGHTNESS_UP",
"aliases": [
"LM_BRIU"
]
},
"0x7816": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_BRIGHTNESS_DOWN",
"aliases": [
"LM_BRID"
]
},
"0x7817": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_SPEED_UP",
"aliases": [
"LM_SPDU"
]
},
"0x7818": {
"group": "led_matrix",
"key": "QK_LED_MATRIX_SPEED_DOWN",
"aliases": [
"LM_SPDD"
]
},
"0x7820": {
"group": "underglow",
"key": "QK_UNDERGLOW_TOGGLE",
"aliases": [
"UG_TOGG"
]
},
"0x7821": {
"group": "underglow",
"key": "QK_UNDERGLOW_MODE_NEXT",
"aliases": [
"!reset!",
"UG_NEXT"
]
},
"0x7822": {
"group": "underglow",
"key": "QK_UNDERGLOW_MODE_PREVIOUS",
"aliases": [
"!reset!",
"UG_PREV"
]
},
"0x7823": {
"group": "underglow",
"key": "QK_UNDERGLOW_HUE_UP",
"aliases": [
"UG_HUEU"
]
},
"0x7824": {
"group": "underglow",
"key": "QK_UNDERGLOW_HUE_DOWN",
"aliases": [
"UG_HUED"
]
},
"0x7825": {
"group": "underglow",
"key": "QK_UNDERGLOW_SATURATION_UP",
"aliases": [
"UG_SATU"
]
},
"0x7826": {
"group": "underglow",
"key": "QK_UNDERGLOW_SATURATION_DOWN",
"aliases": [
"UG_SATD"
]
},
"0x7827": {
"group": "underglow",
"key": "QK_UNDERGLOW_VALUE_UP",
"aliases": [
"UG_VALU"
]
},
"0x7828": {
"group": "underglow",
"key": "QK_UNDERGLOW_VALUE_DOWN",
"aliases": [
"UG_VALD"
]
},
"0x7829": {
"group": "underglow",
"key": "QK_UNDERGLOW_SPEED_UP",
"aliases": [
"UG_SPDU"
]
},
"0x782A": {
"group": "underglow",
"key": "QK_UNDERGLOW_SPEED_DOWN",
"aliases": [
"UG_SPDD"
]
},
"0x7840": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_ON",
"aliases": [
"RM_ON"
]
},
"0x7841": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_OFF",
"aliases": [
"RM_OFF"
]
},
"0x7842": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_TOGGLE",
"aliases": [
"RM_TOGG"
]
},
"0x7843": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_MODE_NEXT",
"aliases": [
"RM_NEXT"
]
},
"0x7844": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_MODE_PREVIOUS",
"aliases": [
"RM_PREV"
]
},
"0x7845": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_HUE_UP",
"aliases": [
"RM_HUEU"
]
},
"0x7846": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_HUE_DOWN",
"aliases": [
"RM_HUED"
]
},
"0x7847": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_SATURATION_UP",
"aliases": [
"RM_SATU"
]
},
"0x7848": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_SATURATION_DOWN",
"aliases": [
"RM_SATD"
]
},
"0x7849": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_VALUE_UP",
"aliases": [
"RM_VALU"
]
},
"0x784A": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_VALUE_DOWN",
"aliases": [
"RM_VALD"
]
},
"0x784B": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_SPEED_UP",
"aliases": [
"RM_SPDU"
]
},
"0x784C": {
"group": "rgb_matrix",
"key": "QK_RGB_MATRIX_SPEED_DOWN",
"aliases": [
"RM_SPDD"
]
}
}
}

View File

@ -19,6 +19,8 @@
// Audio
"AUDIO_DEFAULT_ON": {"info_key": "audio.default.on", "value_type": "bool"},
"AUDIO_DEFAULT_CLICKY_ON": {"info_key": "audio.default.clicky", "value_type": "bool"},
"AUDIO_POWER_CONTROL_PIN": {"info_key": "audio.power_control.pin"},
"AUDIO_POWER_CONTROL_PIN_ON_STATE": {"info_key": "audio.power_control.on_state", "value_type": "int" },
"AUDIO_VOICES": {"info_key": "audio.voices", "value_type": "flag"},
"SENDSTRING_BELL": {"info_key": "audio.macro_beep", "value_type": "flag"},
@ -162,7 +164,6 @@
"RGBLIGHT_DEFAULT_SAT": {"info_key": "rgblight.default.sat", "value_type": "int"},
"RGBLIGHT_DEFAULT_VAL": {"info_key": "rgblight.default.val", "value_type": "int"},
"RGBLIGHT_DEFAULT_SPD": {"info_key": "rgblight.default.speed", "value_type": "int"},
"RGBW": {"info_key": "rgblight.rgbw", "value_type": "flag"},
// Secure
"SECURE_IDLE_TIMEOUT": {"info_key": "secure.idle_timeout", "value_type": "int"},
@ -213,6 +214,7 @@
"WS2812_DI_PIN": {"info_key": "ws2812.pin"},
"WS2812_I2C_ADDRESS": {"info_key": "ws2812.i2c_address", "value_type": "hex"},
"WS2812_I2C_TIMEOUT": {"info_key": "ws2812.i2c_timeout", "value_type": "int"},
"WS2812_RGBW": {"info_key": "ws2812.rgbw", "value_type": "flag"},
"LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"},
@ -227,6 +229,7 @@
"PREVENT_STUCK_MODIFIERS": {"info_key": "_invalid.prevent_stuck_mods", "invalid": true},
"QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int", "deprecated": true},
"RGB_DI_PIN": {"info_key": "rgblight.pin", "invalid": true, "replace_with": "WS2812_DI_PIN or APA102_DI_PIN"},
"RGBW": {"info_key": "rgblight.rgbw", "invalid": true, "replace_with": "WS2812_RGBW"},
"RGB_DISABLE_WHEN_USB_SUSPENDED": {"info_key": "_invalid.rgb_matrix_sleep", "invalid": true, "replace_with": "RGB_MATRIX_SLEEP"},
"RGBLIGHT_ANIMATIONS": {"info_key": "_invalid.rgblight.animations.all", "value_type": "flag", "invalid": true},
"TAPPING_FORCE_HOLD": {"info_key": "tapping.force_hold", "value_type": "flag", "deprecated": true},

View File

@ -11,6 +11,7 @@
// invalid: Default `false`. Set to `true` to generate errors when a value exists
// replace_with: use with a key marked deprecated or invalid to designate a replacement
"AUDIO_DRIVER": {"info_key": "audio.driver"},
"BACKLIGHT_DRIVER": {"info_key": "backlight.driver"},
"BLUETOOTH_DRIVER": {"info_key": "bluetooth.driver"},
"BOARD": {"info_key": "board"},
@ -23,6 +24,7 @@
"ENCODER_ENABLE": {"info_key": "encoder.enabled", "value_type": "bool"},
"ENCODER_DRIVER": {"info_key": "encoder.driver"},
"FIRMWARE_FORMAT": {"info_key": "build.firmware_format"},
"HAPTIC_DRIVER": {"info_key": "haptic.driver"},
"KEYBOARD_SHARED_EP": {"info_key": "usb.shared_endpoint.keyboard", "value_type": "bool"},
"LAYOUTS": {"info_key": "community_layouts", "value_type": "list"},
"LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"},
@ -43,7 +45,7 @@
"SPLIT_TRANSPORT": {"info_key": "split.transport.protocol", "to_c": false},
"STENO_ENABLE": {"info_key": "stenography.enabled", "value_type": "bool"},
"STENO_PROTOCOL": {"info_key": "stenography.protocol"},
"WAIT_FOR_USB": {"info_key": "usb.wait_for", "value_type": "bool"},
"USB_WAIT_FOR_ENUMERATION": {"info_key": "usb.wait_for_enumeration", "value_type": "bool"},
"WEAR_LEVELING_DRIVER": {"info_key": "eeprom.wear_leveling.driver"},
"WS2812_DRIVER": {"info_key": "ws2812.driver"},

View File

@ -1518,5 +1518,12 @@
// Moved during 2023 Q4 cycle
"ymdk/melody96": {
"target": "ymdk/melody96/soldered"
},
// Moved during 2024 Q2 cycle
"kprepublic/jj40": {
"target": "kprepublic/jj40/rev1"
},
"kprepublic/jj50": {
"target": "kprepublic/jj50/rev1"
}
}

View File

@ -133,8 +133,20 @@
"clicky": {"type": "boolean"}
}
},
"driver": {
"type": "string",
"enum": ["dac_additive", "dac_basic", "pwm_software", "pwm_hardware"]
},
"macro_beep": {"type": "boolean"},
"pins": {"$ref": "qmk.definitions.v1#/mcu_pin_array"},
"power_control": {
"type": "object",
"additionalProperties": false,
"properties": {
"on_state": {"$ref": "qmk.definitions.v1#/bit"},
"pin": {"$ref": "qmk.definitions.v1#/mcu_pin"}
}
},
"voices": {"type": "boolean"}
}
},
@ -379,6 +391,15 @@
}
}
},
"haptic": {
"type": "object",
"properties": {
"driver": {
"type": "string",
"enum": ["drv2605l", "solenoid"]
}
}
},
"leader_key": {
"type": "object",
"properties": {
@ -445,6 +466,7 @@
"enum": [
"custom",
"is31fl3218",
"is31fl3236",
"is31fl3729",
"is31fl3731",
"is31fl3733",
@ -527,6 +549,7 @@
"aw20216s",
"custom",
"is31fl3218",
"is31fl3236",
"is31fl3729",
"is31fl3731",
"is31fl3733",
@ -638,7 +661,10 @@
"$ref": "qmk.definitions.v1#/mcu_pin",
"$comment": "Deprecated: use ws2812.pin instead"
},
"rgbw": {"type": "boolean"},
"rgbw": {
"type": "boolean",
"$comment": "Deprecated: use ws2812.rgbw instead"
},
"saturation_steps": {"$ref": "qmk.definitions.v1#/unsigned_int"},
"sleep": {"type": "boolean"},
"split": {"type": "boolean"},
@ -779,7 +805,7 @@
"properties": {
"protocol": {
"type": "string",
"enum": ["custom", "i2c", "serial", "serial_usart"]
"enum": ["custom", "i2c", "serial"]
},
"sync": {
"type": "object",
@ -875,7 +901,7 @@
}
},
"suspend_wakeup_delay": {"$ref": "qmk.definitions.v1#/unsigned_int"},
"wait_for": {"type": "boolean"}
"wait_for_enumeration": {"type": "boolean"}
}
},
"qmk": {
@ -914,6 +940,7 @@
"enum": ["bitbang", "custom", "i2c", "pwm", "spi", "vendor"]
},
"pin": {"$ref": "qmk.definitions.v1#/mcu_pin"},
"rgbw": {"type": "boolean"},
"i2c_address": {"$ref": "qmk.definitions.v1#/hex_number_2d"},
"i2c_timeout": {"$ref": "qmk.definitions.v1#/unsigned_int"}
}

View File

@ -1,20 +0,0 @@
// Copyright %YEAR% %REAL_NAME% (@%USER_NAME%)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -0,0 +1,35 @@
# MechKeys ACR60 Layout Updates
This PR removed and changed some of the layouts that were configured for
the ACR60. If you use one of the following layouts, you will need to
update your keymap:
- [`LAYOUT_hhkb`](#layout-hhkb)
- [`LAYOUT_true_hhkb`](#layout-true-hhkb)
- [`LAYOUT_directional`](#layout-directional)
- [`LAYOUT_mitchsplit`](#layout-mitchsplit)
## `LAYOUT_hhkb` :id=layout-hhkb
1. Change your layout macro to `LAYOUT_60_hhkb`.
2. Remove any keycodes for the key between Left Shift and QWERTY Z.
## `LAYOUT_true_hhkb` :id=layout-true-hhkb
1. Change your layout macro to `LAYOUT_60_true_hhkb`.
2. Remove any keycodes for the key between Left Shift and QWERTY Z.
## `LAYOUT_directional` :id=layout-directional
1. Change your layout macro to `LAYOUT_60_ansi_arrow_split_bs`.
2. Remove any keycodes for the key between Left Shift and QWERTY Z.
3. Remove any keycodes for the keys immediately before *and* after the
1.25u key of Split Spacebar.
If you need split spacebars, you may implement
`LAYOUT_60_ansi_arrow_split_space_split_bs` and change your layout to
it, removing the keycode between Left Shift and QWERTY Z.
## `LAYOUT_mitchsplit` :id=layout-mitchsplit
1. Use `LAYOUT_60_ansi_split_space_split_rshift`.

View File

@ -803,3 +803,39 @@ This command converts a TTF font to an intermediate format for editing, before c
This command converts an intermediate font image to the QFF File Format. See the [Quantum Painter](quantum_painter.md?id=quantum-painter-cli) documentation for more information on this command.
## `qmk test-c`
This command runs the C unit test suite. If you make changes to C code you should ensure this runs successfully.
**Usage**:
```
qmk test-c [-h] [-t TEST] [-l] [-c] [-e ENV] [-j PARALLEL]
options:
-h, --help show this help message and exit
-t TEST, --test TEST Test to run from the available list. Supports wildcard globs. May be passed multiple times.
-l, --list List available tests.
-c, --clean Remove object files before compiling.
-e ENV, --env ENV Set a variable to be passed to make. May be passed multiple times.
-j PARALLEL, --parallel PARALLEL
Set the number of parallel make jobs; 0 means unlimited.
```
**Examples**:
Run entire test suite:
qmk test-c
List available tests:
qmk test-c --list
Run matching test:
qmk test-c --test unicode*
Run single test:
qmk test-c --test basic

View File

@ -237,7 +237,7 @@ If you define these options you will enable the associated feature, which may in
* units to step when in/decreasing saturation
* `#define RGBLIGHT_VAL_STEP 12`
* units to step when in/decreasing value (brightness)
* `#define RGBW`
* `#define WS2812_RGBW`
* Enables RGBW LED support
## Mouse Key Options
@ -446,7 +446,7 @@ Use these to enable or disable building certain features. The more you have enab
* Allows replacing the standard matrix scanning routine with a custom one.
* `DEBOUNCE_TYPE`
* Allows replacing the standard key debouncing routine with an alternative or custom one.
* `WAIT_FOR_USB`
* `USB_WAIT_FOR_ENUMERATION`
* Forces the keyboard to wait for a USB connection to be established before it starts up
* `NO_USB_STARTUP_CHECK`
* Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

View File

@ -171,29 +171,31 @@ The available keycodes for audio are:
## Audio Config
| Settings | Default | Description |
|---------------------------------|----------------------|-------------------------------------------------------------------------------|
|`AUDIO_PIN` | *Not defined* |Configures the pin that the speaker is connected to. |
|`AUDIO_PIN_ALT` | *Not defined* |Configures the pin for a second speaker or second pin connected to one speaker.|
|`AUDIO_PIN_ALT_AS_NEGATIVE` | *Not defined* |Enables support for one speaker connected to two pins. |
|`AUDIO_INIT_DELAY` | *Not defined* |Enables delay during startup song to accomidate for USB startup issues. |
|`AUDIO_ENABLE_TONE_MULTIPLEXING` | *Not defined* |Enables time splicing/multiplexing to create multiple tones simutaneously. |
|`STARTUP_SONG` | `STARTUP_SOUND` |Plays when the keyboard starts up (audio.c) |
|`GOODBYE_SONG` | `GOODBYE_SOUND` |Plays when you press the QK_BOOT key (quantum.c) |
|`AG_NORM_SONG` | `AG_NORM_SOUND` |Plays when you press AG_NORM (process_magic.c) |
|`AG_SWAP_SONG` | `AG_SWAP_SOUND` |Plays when you press AG_SWAP (process_magic.c) |
|`CG_NORM_SONG` | `AG_NORM_SOUND` |Plays when you press CG_NORM (process_magic.c) |
|`CG_SWAP_SONG` | `AG_SWAP_SOUND` |Plays when you press CG_SWAP (process_magic.c) |
|`MUSIC_ON_SONG` | `MUSIC_ON_SOUND` |Plays when music mode is activated (process_music.c) |
|`MUSIC_OFF_SONG` | `MUSIC_OFF_SOUND` |Plays when music mode is deactivated (process_music.c) |
|`MIDI_ON_SONG` | `MUSIC_ON_SOUND` |Plays when midi mode is activated (process_music.c) |
|`MIDI_OFF_SONG` | `MUSIC_OFF_SOUND` |Plays when midi mode is deactivated (process_music.c) |
|`CHROMATIC_SONG` | `CHROMATIC_SOUND` |Plays when the chromatic music mode is selected (process_music.c) |
|`GUITAR_SONG` | `GUITAR_SOUND` |Plays when the guitar music mode is selected (process_music.c) |
|`VIOLIN_SONG` | `VIOLIN_SOUND` |Plays when the violin music mode is selected (process_music.c) |
|`MAJOR_SONG` | `MAJOR_SOUND` |Plays when the major music mode is selected (process_music.c) |
|`DEFAULT_LAYER_SONGS` | *Not defined* |Plays song when switched default layers with [`set_single_persistent_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer)(quantum.c) |
|`SENDSTRING_BELL` | *Not defined* |Plays chime when the "enter" ("\a") character is sent (send_string.c) |
| Settings | Default | Description |
|----------------------------------|----------------------|---------------------------------------------------------------------------------------------|
|`AUDIO_PIN` | *Not defined* |Configures the pin that the speaker is connected to. |
|`AUDIO_PIN_ALT` | *Not defined* |Configures the pin for a second speaker or second pin connected to one speaker. |
|`AUDIO_PIN_ALT_AS_NEGATIVE` | *Not defined* |Enables support for one speaker connected to two pins. |
|`AUDIO_INIT_DELAY` | *Not defined* |Enables delay during startup song to accomidate for USB startup issues. |
|`AUDIO_ENABLE_TONE_MULTIPLEXING` | *Not defined* |Enables time splicing/multiplexing to create multiple tones simutaneously. |
|`AUDIO_POWER_CONTROL_PIN` | *Not defined* |Enables power control code to enable or cut off power to speaker (such as with PAM8302 amp). |
|`AUDIO_POWER_CONTROL_PIN_ON_STATE`| `1` |The state of the audio power control pin when audio is "on" - `1` for high, `0` for low. |
|`STARTUP_SONG` | `STARTUP_SOUND` |Plays when the keyboard starts up (audio.c) |
|`GOODBYE_SONG` | `GOODBYE_SOUND` |Plays when you press the QK_BOOT key (quantum.c) |
|`AG_NORM_SONG` | `AG_NORM_SOUND` |Plays when you press AG_NORM (process_magic.c) |
|`AG_SWAP_SONG` | `AG_SWAP_SOUND` |Plays when you press AG_SWAP (process_magic.c) |
|`CG_NORM_SONG` | `AG_NORM_SOUND` |Plays when you press CG_NORM (process_magic.c) |
|`CG_SWAP_SONG` | `AG_SWAP_SOUND` |Plays when you press CG_SWAP (process_magic.c) |
|`MUSIC_ON_SONG` | `MUSIC_ON_SOUND` |Plays when music mode is activated (process_music.c) |
|`MUSIC_OFF_SONG` | `MUSIC_OFF_SOUND` |Plays when music mode is deactivated (process_music.c) |
|`MIDI_ON_SONG` | `MUSIC_ON_SOUND` |Plays when midi mode is activated (process_music.c) |
|`MIDI_OFF_SONG` | `MUSIC_OFF_SOUND` |Plays when midi mode is deactivated (process_music.c) |
|`CHROMATIC_SONG` | `CHROMATIC_SOUND` |Plays when the chromatic music mode is selected (process_music.c) |
|`GUITAR_SONG` | `GUITAR_SOUND` |Plays when the guitar music mode is selected (process_music.c) |
|`VIOLIN_SONG` | `VIOLIN_SOUND` |Plays when the violin music mode is selected (process_music.c) |
|`MAJOR_SONG` | `MAJOR_SOUND` |Plays when the major music mode is selected (process_music.c) |
|`DEFAULT_LAYER_SONGS` | *Not defined* |Plays song when switched default layers with [`set_single_persistent_default_layer(layer)`](ref_functions.md#setting-the-persistent-default-layer)(quantum.c). |
|`SENDSTRING_BELL` | *Not defined* |Plays chime when the "enter" ("\a") character is sent (send_string.c) |
## Tempo
the 'speed' at which SONGs are played is dictated by the set Tempo, which is measured in beats-per-minute. Note lengths are defined relative to that.

View File

@ -217,16 +217,17 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
## Keycodes :id=keycodes
All LED matrix keycodes are currently shared with the [Backlight feature](feature_backlight.md).
| Key | Aliases | Description |
|-------------------------|-----------|-------------------------------|
| `QK_BACKLIGHT_TOGGLE` | `BL_TOGG` | Toggle LED Matrix on or off |
| `QK_BACKLIGHT_STEP` | `BL_STEP` | Cycle through modes |
| `QK_BACKLIGHT_ON` | `BL_ON` | Turn on LED Matrix |
| `QK_BACKLIGHT_OFF` | `BL_OFF` | Turn off LED Matrix |
| `QK_BACKLIGHT_UP` | `BL_UP` | Increase the brightness level |
| `QK_BACKLIGHT_DOWN` | `BL_DOWN` | Decrease the brightness level |
|Key |Aliases |Description |
|-------------------------------|---------|-----------------------------------|
|`QK_LED_MATRIX_ON` |`LM_ON` |Turn on LED Matrix |
|`QK_LED_MATRIX_OFF` |`LM_OFF` |Turn off LED Matrix |
|`QK_LED_MATRIX_TOGGLE` |`LM_TOGG`|Toggle LED Matrix on or off |
|`QK_LED_MATRIX_MODE_NEXT` |`LM_NEXT`|Cycle through animations |
|`QK_LED_MATRIX_MODE_PREVIOUS` |`LM_PREV`|Cycle through animations in reverse|
|`QK_LED_MATRIX_BRIGHTNESS_UP` |`LM_BRIU`|Increase the brightness level |
|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level |
|`QK_LED_MATRIX_SPEED_UP` |`LM_SPDU`|Increase the animation speed |
|`QK_LED_MATRIX_SPEED_DOWN` |`LM_SPDD`|Decrease the animation speed |
## LED Matrix Effects :id=led-matrix-effects

View File

@ -780,6 +780,9 @@ There are several functions that allow for more advanced interaction with the au
| `get_auto_mouse_timeout(void)` | Return the current timeout for turing off the layer | | `uint16_t` |
| `set_auto_mouse_debounce(uint16_t timeout)` | Change/set the debounce for preventing layer activation | | `void`(None) |
| `get_auto_mouse_debounce(void)` | Return the current debounce for preventing layer activation | | `uint8_t` |
| `is_auto_mouse_active(void)` | Returns the active state of the auto mouse layer (eg if the layer has been triggered)| | `bool` |
| `get_auto_mouse_key_tracker(void)` | Gets the current count for the auto mouse key tracker. | | `int8_t` |
| `set_auto_mouse_key_tracker(int8_t key_tracker)` | Sets/Overrides the current count for the auto mouse key tracker. | | `void`(None) |
_NOTES:_
- _Due to the nature of how some functions work, the `auto_mouse_trigger_reset`, and `auto_mouse_layer_off` functions should never be called in the `layer_state_set_*` stack as this can cause indefinite loops._

View File

@ -6,7 +6,7 @@ QMK has the ability to control RGB LEDs attached to your keyboard. This is commo
Some keyboards come with RGB LEDs preinstalled. Others must have them installed after the fact. See the [Hardware Modification](#hardware-modification) section for information on adding RGB lighting to your keyboard.
Currently QMK supports the following addressable LEDs (however, the white LED in RGBW variants is not supported):
Currently QMK supports the following addressable LEDs:
* WS2811, WS2812, WS2812B, WS2812C, etc.
* SK6812, SK6812MINI, SK6805
@ -356,27 +356,12 @@ Usually lighting layers apply their configured brightness once activated. If you
If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight/rgblight.h) for the full list, but the most commonly used functions include:
### Utility Functions
|Function |Description |
|--------------------------------------------|-------------------------------------------------------------------|
|`sethsv(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value |
|`sethsv_raw(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check |
|`setrgb(r, g, b, ledbuf)` |Set ledbuf to the given RGB value where `r`/`g`/`b` |
### Low level Functions
|Function |Description |
|--------------------------------------------|-------------------------------------------|
|`rgblight_set()` |Flush out led buffers to LEDs |
|`rgblight_set_clipping_range(pos, num)` |Set clipping Range. see [Clipping Range](#clipping-range) |
Example:
```c
sethsv(HSV_WHITE, (rgb_led_t *)&led[0]); // led 0
sethsv(HSV_RED, (rgb_led_t *)&led[1]); // led 1
sethsv(HSV_GREEN, (rgb_led_t *)&led[2]); // led 2
rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly.
```
### Effects and Animations Functions
#### effect range setting
|Function |Description |

View File

@ -44,7 +44,7 @@ While the tempo defines the absolute speed at which the sequencer goes through t
|-------------------------------|---------|---------------------------------------------------|
|`QK_SEQUENCER_ON` |`SQ_ON` |Start the step sequencer |
|`QK_SEQUENCER_OFF` |`SQ_OFF` |Stop the step sequencer |
|`QK_SEQUENCER_TOGGLE` |`SQ_TOG` |Toggle the step sequencer playback |
|`QK_SEQUENCER_TOGGLE` |`SQ_TOGG`|Toggle the step sequencer playback |
|`QK_SEQUENCER_STEPS_ALL` |`SQ_SALL`|Enable all the steps |
|`QK_SEQUENCER_STEPS_CLEAR` |`SQ_SCLR`|Disable all the steps |
|`QK_SEQUENCER_TEMPO_DOWN` |`SQ_TMPD`|Decrease the tempo |

View File

@ -266,7 +266,7 @@ This enables syncing of the Host LED status (caps lock, num lock, etc) between b
#define SPLIT_MODS_ENABLE
```
This enables transmitting modifier state (normal, weak and oneshot) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
This enables transmitting modifier state (normal, weak, oneshot and oneshot locked) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
```c
#define SPLIT_WPM_ENABLE

View File

@ -378,7 +378,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
* 標準マトリックス走査ルーチンを独自のものに置き換えることができます。
* `DEBOUNCE_TYPE`
* 標準キーデバウンスルーチンを代替または独自のものに置き換えることができます。
* `WAIT_FOR_USB`
* `USB_WAIT_FOR_ENUMERATION`
* キーボードが起動する前に、USB 接続が確立されるのをキーボードに待機させます
* `NO_USB_STARTUP_CHECK`
* キーボードの起動後の usb サスペンドチェックを無効にします。通常、キーボードはタスクが実行される前にホストがウェイク アップするのを待ちます。分割キーボードは半分はウェイクアップコールを取得できませんが、マスタにコマンドを送信する必要があるため、役に立ちます。

View File

@ -398,6 +398,22 @@ See also: [Leader Key](feature_leader_key.md)
|---------|------------------------|
|`QK_LEAD`|Begins a leader sequence|
## LED Matrix :id=led-matrix
See also: [LED Matrix](feature_led_matrix.md)
|Key |Aliases |Description |
|-------------------------------|---------|-----------------------------------|
|`QK_LED_MATRIX_ON` |`LM_ON` |Turn on LED Matrix |
|`QK_LED_MATRIX_OFF` |`LM_OFF` |Turn off LED Matrix |
|`QK_LED_MATRIX_TOGGLE` |`LM_TOGG`|Toggle LED Matrix on or off |
|`QK_LED_MATRIX_MODE_NEXT` |`LM_NEXT`|Cycle through animations |
|`QK_LED_MATRIX_MODE_PREVIOUS` |`LM_PREV`|Cycle through animations in reverse|
|`QK_LED_MATRIX_BRIGHTNESS_UP` |`LM_BRIU`|Increase the brightness level |
|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level |
|`QK_LED_MATRIX_SPEED_UP` |`LM_SPDU`|Increase the animation speed |
|`QK_LED_MATRIX_SPEED_DOWN` |`LM_SPDD`|Decrease the animation speed |
## Magic Keycodes :id=magic-keycodes
See also: [Magic Keycodes](keycodes_magic.md)

View File

@ -118,15 +118,24 @@ Configures the [Audio](feature_audio.md) feature.
* `clicky`
* The default audio clicky enabled state.
* Default: `true`
* `driver`
* The driver to use. Must be one of `dac_additive`, `dac_basic`, `pwm_software`, `pwm_hardware`.
* `macro_beep`
* Play a short beep for `\a` (ASCII `BEL`) characters in Send String macros.
* Default: `false`
* `pins` (Required)
* The GPIO pin(s) connected to the speaker(s).
* `power_control`
* `on_state`
* The logical GPIO state required to turn the speaker on.
* Default: `1` (on = high)
* `pin`
* The GPIO pin connected to speaker power circuit.
* `voices`
* Use multiple audio voices.
* Default: `false`
## Backlight :id=backlight
Configures the [Backlight](feature_backlight.md) feature.
@ -579,9 +588,6 @@ Configures the [RGB Lighting](feature_rgblight.md) feature.
* `max_brightness`
* The maximum value which the HSV "V" component is scaled to, from 0 to 255.
* Default: `255`
* `rgbw`
* Enable RGBW LEDs.
* Default: `false`
* `saturation_steps`
* The number of saturation adjustment steps.
* Default: `17`
@ -633,7 +639,7 @@ Configures the [RGB Matrix](feature_rgb_matrix.md) feature.
* The default animation speed.
* Default: `128`
* `driver` (Required)
* The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3729`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`.
* The driver to use. Must be one of `aw20216s`, `custom`, `is31fl3218`, `is31fl3236`, `is31fl3729`, `is31fl3731`, `is31fl3733`, `is31fl3736`, `is31fl3737`, `is31fl3741`, `is31fl3742a`, `is31fl3743a`, `is31fl3745`, `is31fl3746a`, `snled27351`, `ws2812`.
* `hue_steps`
* The number of hue adjustment steps.
* Default: `8`
@ -733,7 +739,7 @@ Configures the [Split Keyboard](feature_split_keyboard.md) feature.
* Default: `1`
* `transport`
* `protocol`
* The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`, `serial_usart`.
* The split transport protocol to use. Must be one of `custom`, `i2c`, `serial`.
* `sync`
* `activity`
* Mirror the activity timestamps to the secondary half.
@ -826,7 +832,7 @@ Configures the [Stenography](feature_stenography.md) feature.
* `suspend_wakeup_delay`
* The amount of time to wait after sending a wakeup packet, in milliseconds.
* Default: `0` (disabled)
* `wait_for`
* `wait_for_enumeration`
* Force the keyboard to wait for USB enumeration before starting up.
* Default: `false`
@ -846,3 +852,6 @@ Configures the [WS2812](ws2812_driver.md) driver.
* `i2c_timeout`
* The I²C timeout in milliseconds (`i2c` driver only).
* Default: `100` (100 ms)
* `rgbw`
* Enable RGBW LEDs.
* Default: `false`

View File

@ -23,6 +23,8 @@ These headers are located in [`quantum/keymap_extras/`](https://github.com/qmk/q
|Canadian Multilingual (CSA) |`keymap_canadian_multilingual.h` |`sendstring_canadian_multilingual.h`|
|Croatian |`keymap_croatian.h` |`sendstring_croatian.h` |
|Czech |`keymap_czech.h` |`sendstring_czech.h` |
|Czech (macOS, ANSI) |`keymap_czech_mac_ansi.h` |`sendstring_czech_mac_ansi.h` |
|Czech (macOS, ISO) |`keymap_czech_mac_iso.h` |`sendstring_czech_mac_iso.h` |
|Danish |`keymap_danish.h` |`sendstring_danish.h` |
|Dutch (Belgium) |`keymap_belgian.h` |`sendstring_belgian.h` |
|English (Ireland) |`keymap_irish.h` | |

View File

@ -33,6 +33,7 @@ Add the following to your `config.h`:
|`WS2812_T0H` |`350` |The length of a "0" bit's high phase in nanoseconds |
|`WS2812_TRST_US` |`280` |The length of the reset phase in microseconds |
|`WS2812_BYTE_ORDER`|`WS2812_BYTE_ORDER_GRB`|The byte order of the RGB data |
|`WS2812_RGBW` |*Not defined* |Enables RGBW support (except `i2c` driver) |
### Timing Adjustment :id=timing-adjustment
@ -58,6 +59,27 @@ Where the byte order may be one of:
|`RGB` |WS2812B-2020 |
|`BGR` |TM1812 |
### RGBW Support :id=rgbw-support
Rendering the color white with RGB LEDs is typically inconsistent due to inherent variations between each individual LED die. However, some WS2812 variants (such as SK6812RGBW) also possess a white LED along with the red, green, and blue channels, which allows for a more accurate white to be displayed.
QMK can automatically convert the RGB data to be sent to the LEDs to mix in the white channel:
```
w = min(r, g, b)
r -= w
g -= w
b -= w
```
Thus, an RGB triplet of `255,255,255` will simply turn on the white LED fully (`0,0,0,255`).
To enable RGBW conversion, add the following to your `config.h`:
```c
#define WS2812_RGBW
```
## Driver Configuration :id=driver-configuration
Driver selection can be configured in `rules.mk` as `WS2812_DRIVER`, or in `info.json` as `ws2812.driver`. Valid values are `bitbang` (default), `i2c`, `spi`, `pwm`, `vendor`, or `custom`. See below for information on individual drivers.
@ -208,9 +230,9 @@ The following `#define`s apply only to the `pwm` driver:
|`WS2812_PWM_DRIVER` |`PWMD2` |The PWM driver to use |
|`WS2812_PWM_CHANNEL` |`2` |The PWM channel to use |
|`WS2812_PWM_PAL_MODE` |`2` |The pin alternative function to use |
|`WS2812_DMA_STREAM` |`STM32_DMA1_STREAM2`|The DMA Stream for `TIMx_UP` |
|`WS2812_DMA_CHANNEL` |`2` |The DMA Channel for `TIMx_UP` |
|`WS2812_DMAMUX_ID` |*Not defined* |The DMAMUX configuration for `TIMx_UP` - only required if your MCU has a DMAMUX peripheral|
|`WS2812_PWM_DMA_STREAM` |`STM32_DMA1_STREAM2`|The DMA Stream for `TIMx_UP` |
|`WS2812_PWM_DMA_CHANNEL` |`2` |The DMA Channel for `TIMx_UP` |
|`WS2812_PWM_DMAMUX_ID` |*Not defined* |The DMAMUX configuration for `TIMx_UP` - only required if your MCU has a DMAMUX peripheral|
|`WS2812_PWM_COMPLEMENTARY_OUTPUT`|*Not defined* |Whether the PWM output is complementary (`TIMx_CHyN`) |
?> Using a complementary timer output (`TIMx_CHyN`) is possible only for advanced-control timers (1, 8 and 20 on STM32), and the `STM32_PWM_USE_ADVANCED` option in `mcuconf.h` must be set to `TRUE`. Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.

View File

@ -74,20 +74,20 @@ bool mcp23018_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB) {
return true;
}
bool mcp23018_readPins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* out) {
bool mcp23018_read_pins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* out) {
uint8_t addr = SLAVE_TO_ADDR(slave_addr);
uint8_t cmd = port ? CMD_GPIOB : CMD_GPIOA;
i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
if (ret != I2C_STATUS_SUCCESS) {
dprintf("mcp23018_readPins::FAILED::%u\n", ret);
dprintf("mcp23018_read_pins::FAILED::%u\n", ret);
return false;
}
return true;
}
bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* out) {
bool mcp23018_read_pins_all(uint8_t slave_addr, uint16_t* out) {
uint8_t addr = SLAVE_TO_ADDR(slave_addr);
typedef union {
@ -99,7 +99,7 @@ bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* out) {
i2c_status_t ret = i2c_read_register(addr, CMD_GPIOA, &data.u8[0], sizeof(data), TIMEOUT);
if (ret != I2C_STATUS_SUCCESS) {
dprintf("mcp23018_readPins::FAILED::%u\n", ret);
dprintf("mcp23018_read_pins_all::FAILED::%u\n", ret);
return false;
}

View File

@ -55,11 +55,16 @@ bool mcp23018_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB);
/**
* Read state of a given port
*/
bool mcp23018_readPins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* ret);
bool mcp23018_read_pins(uint8_t slave_addr, mcp23018_port_t port, uint8_t* ret);
/**
* Read state of both ports sequentially
*
* - slightly faster than multiple readPins
*/
bool mcp23018_readPins_all(uint8_t slave_addr, uint16_t* ret);
bool mcp23018_read_pins_all(uint8_t slave_addr, uint16_t* ret);
// DEPRECATED - DO NOT USE
#define mcp23018_readPins mcp23018_read_pins
#define mcp23018_readPins_all mcp23018_read_pins_all

View File

@ -133,7 +133,7 @@ bool pca9505_set_output(uint8_t slave_addr, pca9505_port_t port, uint8_t conf) {
return true;
}
bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
bool pca9505_read_pins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
uint8_t addr = SLAVE_TO_ADDR(slave_addr);
uint8_t cmd = 0;
switch (port) {
@ -156,7 +156,7 @@ bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* out) {
i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
if (ret != I2C_STATUS_SUCCESS) {
print("pca9505_readPins::FAILED\n");
print("pca9505_read_pins::FAILED\n");
return false;
}

View File

@ -64,4 +64,8 @@ bool pca9505_set_output(uint8_t slave_addr, pca9505_port_t port, uint8_t conf);
/**
* Read state of a given port
*/
bool pca9505_readPins(uint8_t slave_addr, pca9505_port_t port, uint8_t* ret);
bool pca9505_read_pins(uint8_t slave_addr, pca9505_port_t port, uint8_t* ret);
// DEPRECATED - DO NOT USE
#define pca9505_readPins pca9505_read_pins

View File

@ -70,20 +70,20 @@ bool pca9555_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB) {
return true;
}
bool pca9555_readPins(uint8_t slave_addr, pca9555_port_t port, uint8_t* out) {
bool pca9555_read_pins(uint8_t slave_addr, pca9555_port_t port, uint8_t* out) {
uint8_t addr = SLAVE_TO_ADDR(slave_addr);
uint8_t cmd = port ? CMD_INPUT_1 : CMD_INPUT_0;
i2c_status_t ret = i2c_read_register(addr, cmd, out, sizeof(uint8_t), TIMEOUT);
if (ret != I2C_STATUS_SUCCESS) {
print("pca9555_readPins::FAILED\n");
print("pca9555_read_pins::FAILED\n");
return false;
}
return true;
}
bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* out) {
bool pca9555_read_pins_all(uint8_t slave_addr, uint16_t* out) {
uint8_t addr = SLAVE_TO_ADDR(slave_addr);
typedef union {
@ -95,7 +95,7 @@ bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* out) {
i2c_status_t ret = i2c_read_register(addr, CMD_INPUT_0, &data.u8[0], sizeof(data), TIMEOUT);
if (ret != I2C_STATUS_SUCCESS) {
print("pca9555_readPins_all::FAILED\n");
print("pca9555_read_pins_all::FAILED\n");
return false;
}

View File

@ -78,11 +78,16 @@ bool pca9555_set_output_all(uint8_t slave_addr, uint8_t confA, uint8_t confB);
/**
* Read state of a given port
*/
bool pca9555_readPins(uint8_t slave_addr, pca9555_port_t port, uint8_t* ret);
bool pca9555_read_pins(uint8_t slave_addr, pca9555_port_t port, uint8_t* ret);
/**
* Read state of both ports sequentially
*
* - slightly faster than multiple readPins
*/
bool pca9555_readPins_all(uint8_t slave_addr, uint16_t* ret);
bool pca9555_read_pins_all(uint8_t slave_addr, uint16_t* ret);
// DEPRECATED - DO NOT USE
#define pca9555_readPins pca9555_read_pins
#define pca9555_readPins_all pca9555_read_pins_all

View File

@ -67,7 +67,9 @@ static void apa102_send_byte(uint8_t byte) {
}
static void apa102_start_frame(void) {
apa102_init();
gpio_write_pin_low(APA102_DI_PIN);
gpio_write_pin_low(APA102_CI_PIN);
for (uint16_t i = 0; i < 4; i++) {
apa102_send_byte(0);
}
@ -103,7 +105,8 @@ static void apa102_end_frame(uint16_t num_leds) {
apa102_send_byte(0);
}
apa102_init();
gpio_write_pin_low(APA102_DI_PIN);
gpio_write_pin_low(APA102_CI_PIN);
}
static void apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t brightness) {
@ -116,9 +119,6 @@ static void apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t
void apa102_init(void) {
gpio_set_pin_output(APA102_DI_PIN);
gpio_set_pin_output(APA102_CI_PIN);
gpio_write_pin_low(APA102_DI_PIN);
gpio_write_pin_low(APA102_CI_PIN);
}
void apa102_setleds(rgb_led_t *start_led, uint16_t num_leds) {

View File

@ -0,0 +1,168 @@
// Copyright 2024 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#include "is31fl3236-mono.h"
#include "i2c_master.h"
#include "gpio.h"
#define IS31FL3236_PWM_REGISTER_COUNT 36
#define IS31FL3236_LED_CONTROL_REGISTER_COUNT 36
#ifndef IS31FL3236_I2C_TIMEOUT
# define IS31FL3236_I2C_TIMEOUT 100
#endif
#ifndef IS31FL3236_I2C_PERSISTENCE
# define IS31FL3236_I2C_PERSISTENCE 0
#endif
#ifndef IS31FL3236_PWM_FREQUENCY
# define IS31FL3236_PWM_FREQUENCY IS31FL3236_PWM_FREQUENCY_3K_HZ // OFS - IS31FL3236A only
#endif
const uint8_t i2c_addresses[IS31FL3236_DRIVER_COUNT] = {
IS31FL3236_I2C_ADDRESS_1,
#ifdef IS31FL3236_I2C_ADDRESS_2
IS31FL3236_I2C_ADDRESS_2,
# ifdef IS31FL3236_I2C_ADDRESS_3
IS31FL3236_I2C_ADDRESS_3,
# ifdef IS31FL3236_I2C_ADDRESS_4
IS31FL3236_I2C_ADDRESS_4,
# endif
# endif
#endif
};
typedef struct is31fl3236_driver_t {
uint8_t pwm_buffer[IS31FL3236_PWM_REGISTER_COUNT];
bool pwm_buffer_dirty;
uint8_t led_control_buffer[IS31FL3236_LED_CONTROL_REGISTER_COUNT];
bool led_control_buffer_dirty;
} PACKED is31fl3236_driver_t;
is31fl3236_driver_t driver_buffers[IS31FL3236_DRIVER_COUNT] = {{
.pwm_buffer = {0},
.pwm_buffer_dirty = false,
.led_control_buffer = {0},
.led_control_buffer_dirty = false,
}};
void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data) {
#if IS31FL3236_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT);
#endif
}
void is31fl3236_write_pwm_buffer(uint8_t index) {
#if IS31FL3236_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
if (i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT);
#endif
}
void is31fl3236_init_drivers(void) {
i2c_init();
#if defined(IS31FL3236_SDB_PIN)
gpio_set_pin_output(IS31FL3236_SDB_PIN);
gpio_write_pin_high(IS31FL3236_SDB_PIN);
#endif
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_init(i);
}
for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
is31fl3236_set_led_control_register(i, true);
}
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_update_led_control_registers(i);
}
}
void is31fl3236_init(uint8_t index) {
// In case we ever want to reinitialize (?)
is31fl3236_write_register(index, IS31FL3236_REG_RESET, 0x00);
// Turn off software shutdown
is31fl3236_write_register(index, IS31FL3236_REG_SHUTDOWN, 0x01);
// Set all PWM values to zero
for (uint8_t i = 0; i < IS31FL3236_PWM_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_PWM + i, 0x00);
}
// turn off all LEDs in the LED control register
for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, 0x00);
}
// Set PWM frequency (IS31FL3236A)
is31fl3236_write_register(index, IS31FL3236_REG_PWM_FREQUENCY, IS31FL3236_PWM_FREQUENCY);
// Load PWM registers and LED Control register data
is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
}
void is31fl3236_set_value(int index, uint8_t value) {
is31fl3236_led_t led;
if (index < IS31FL3236_LED_COUNT) {
memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
if (driver_buffers[led.driver].pwm_buffer[led.v] == value) {
return;
}
driver_buffers[led.driver].pwm_buffer[led.v] = value;
driver_buffers[led.driver].pwm_buffer_dirty = true;
}
}
void is31fl3236_set_value_all(uint8_t value) {
for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
is31fl3236_set_value(i, value);
}
}
void is31fl3236_set_led_control_register(uint8_t index, bool value) {
is31fl3236_led_t led;
memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
driver_buffers[led.driver].led_control_buffer[led.v] = value ? 0x01 : 0x00;
driver_buffers[led.driver].led_control_buffer_dirty = true;
}
void is31fl3236_update_pwm_buffers(uint8_t index) {
if (driver_buffers[index].pwm_buffer_dirty) {
is31fl3236_write_pwm_buffer(index);
// Load PWM registers and LED Control register data
is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
driver_buffers[index].pwm_buffer_dirty = false;
}
}
void is31fl3236_update_led_control_registers(uint8_t index) {
if (driver_buffers[index].led_control_buffer_dirty) {
for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, driver_buffers[index].led_control_buffer[i]);
}
driver_buffers[index].led_control_buffer_dirty = false;
}
}
void is31fl3236_flush(void) {
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_update_pwm_buffers(i);
}
}

View File

@ -0,0 +1,101 @@
// Copyright 2024 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
#include "util.h"
#define IS31FL3236_REG_SHUTDOWN 0x00
#define IS31FL3236_REG_PWM 0x01
#define IS31FL3236_REG_UPDATE 0x25
#define IS31FL3236_REG_LED_CONTROL 0x26
#define IS31FL3236_REG_GLOBAL_CONTROL 0x4A
#define IS31FL3236_REG_PWM_FREQUENCY 0x4B
#define IS31FL3236_REG_RESET 0x4F
#define IS31FL3236_I2C_ADDRESS_GND 0x3C
#define IS31FL3236_I2C_ADDRESS_SCL 0x3D
#define IS31FL3236_I2C_ADDRESS_SDA 0x3E
#define IS31FL3236_I2C_ADDRESS_VCC 0x3F
#if defined(LED_MATRIX_IS31FL3236)
# define IS31FL3236_LED_COUNT LED_MATRIX_LED_COUNT
#endif
#if defined(IS31FL3236_I2C_ADDRESS_4)
# define IS31FL3236_DRIVER_COUNT 4
#elif defined(IS31FL3236_I2C_ADDRESS_3)
# define IS31FL3236_DRIVER_COUNT 3
#elif defined(IS31FL3236_I2C_ADDRESS_2)
# define IS31FL3236_DRIVER_COUNT 2
#elif defined(IS31FL3236_I2C_ADDRESS_1)
# define IS31FL3236_DRIVER_COUNT 1
#endif
typedef struct is31fl3236_led_t {
uint8_t driver : 2;
uint8_t v;
} PACKED is31fl3236_led_t;
extern const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT];
void is31fl3236_init_drivers(void);
void is31fl3236_init(uint8_t index);
void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data);
void is31fl3236_set_value(int index, uint8_t value);
void is31fl3236_set_value_all(uint8_t value);
void is31fl3236_set_led_control_register(uint8_t index, bool value);
void is31fl3236_update_pwm_buffers(uint8_t index);
void is31fl3236_update_led_control_registers(uint8_t index);
void is31fl3236_flush(void);
#define IS31FL3236_PWM_FREQUENCY_3K_HZ 0b0
#define IS31FL3236_PWM_FREQUENCY_22K_HZ 0b1
#define OUT1 0x00
#define OUT2 0x01
#define OUT3 0x02
#define OUT4 0x03
#define OUT5 0x04
#define OUT6 0x05
#define OUT7 0x06
#define OUT8 0x07
#define OUT9 0x08
#define OUT10 0x09
#define OUT11 0x0A
#define OUT12 0x0B
#define OUT13 0x0C
#define OUT14 0x0D
#define OUT15 0x0E
#define OUT16 0x0F
#define OUT17 0x10
#define OUT18 0x11
#define OUT19 0x12
#define OUT20 0x13
#define OUT21 0x14
#define OUT22 0x15
#define OUT23 0x16
#define OUT24 0x17
#define OUT25 0x18
#define OUT26 0x19
#define OUT27 0x1A
#define OUT28 0x1B
#define OUT29 0x1C
#define OUT30 0x1D
#define OUT31 0x1E
#define OUT32 0x1F
#define OUT33 0x20
#define OUT34 0x21
#define OUT35 0x22
#define OUT36 0x23

View File

@ -0,0 +1,172 @@
// Copyright 2024 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#include "is31fl3236.h"
#include "i2c_master.h"
#include "gpio.h"
#define IS31FL3236_PWM_REGISTER_COUNT 36
#define IS31FL3236_LED_CONTROL_REGISTER_COUNT 36
#ifndef IS31FL3236_I2C_TIMEOUT
# define IS31FL3236_I2C_TIMEOUT 100
#endif
#ifndef IS31FL3236_I2C_PERSISTENCE
# define IS31FL3236_I2C_PERSISTENCE 0
#endif
#ifndef IS31FL3236_PWM_FREQUENCY
# define IS31FL3236_PWM_FREQUENCY IS31FL3236_PWM_FREQUENCY_3K_HZ // OFS - IS31FL3236A only
#endif
const uint8_t i2c_addresses[IS31FL3236_DRIVER_COUNT] = {
IS31FL3236_I2C_ADDRESS_1,
#ifdef IS31FL3236_I2C_ADDRESS_2
IS31FL3236_I2C_ADDRESS_2,
# ifdef IS31FL3236_I2C_ADDRESS_3
IS31FL3236_I2C_ADDRESS_3,
# ifdef IS31FL3236_I2C_ADDRESS_4
IS31FL3236_I2C_ADDRESS_4,
# endif
# endif
#endif
};
typedef struct is31fl3236_driver_t {
uint8_t pwm_buffer[IS31FL3236_PWM_REGISTER_COUNT];
bool pwm_buffer_dirty;
uint8_t led_control_buffer[IS31FL3236_LED_CONTROL_REGISTER_COUNT];
bool led_control_buffer_dirty;
} PACKED is31fl3236_driver_t;
is31fl3236_driver_t driver_buffers[IS31FL3236_DRIVER_COUNT] = {{
.pwm_buffer = {0},
.pwm_buffer_dirty = false,
.led_control_buffer = {0},
.led_control_buffer_dirty = false,
}};
void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data) {
#if IS31FL3236_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
if (i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(i2c_addresses[index] << 1, reg, &data, 1, IS31FL3236_I2C_TIMEOUT);
#endif
}
void is31fl3236_write_pwm_buffer(uint8_t index) {
#if IS31FL3236_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3236_I2C_PERSISTENCE; i++) {
if (i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT) == I2C_STATUS_SUCCESS) break;
}
#else
i2c_write_register(i2c_addresses[index] << 1, IS31FL3236_REG_PWM, driver_buffers[index].pwm_buffer, 36, IS31FL3236_I2C_TIMEOUT);
#endif
}
void is31fl3236_init_drivers(void) {
i2c_init();
#if defined(IS31FL3236_SDB_PIN)
gpio_set_pin_output(IS31FL3236_SDB_PIN);
gpio_write_pin_high(IS31FL3236_SDB_PIN);
#endif
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_init(i);
}
for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
is31fl3236_set_led_control_register(i, true, true, true);
}
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_update_led_control_registers(i);
}
}
void is31fl3236_init(uint8_t index) {
// In case we ever want to reinitialize (?)
is31fl3236_write_register(index, IS31FL3236_REG_RESET, 0x00);
// Turn off software shutdown
is31fl3236_write_register(index, IS31FL3236_REG_SHUTDOWN, 0x01);
// Set all PWM values to zero
for (uint8_t i = 0; i < IS31FL3236_PWM_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_PWM + i, 0x00);
}
// turn off all LEDs in the LED control register
for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, 0x00);
}
// Set PWM frequency (IS31FL3236A)
is31fl3236_write_register(index, IS31FL3236_REG_PWM_FREQUENCY, IS31FL3236_PWM_FREQUENCY);
// Load PWM registers and LED Control register data
is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
}
void is31fl3236_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
is31fl3236_led_t led;
if (index < IS31FL3236_LED_COUNT) {
memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
if (driver_buffers[led.driver].pwm_buffer[led.r] == red && driver_buffers[led.driver].pwm_buffer[led.g] == green && driver_buffers[led.driver].pwm_buffer[led.b] == blue) {
return;
}
driver_buffers[led.driver].pwm_buffer[led.r] = red;
driver_buffers[led.driver].pwm_buffer[led.g] = green;
driver_buffers[led.driver].pwm_buffer[led.b] = blue;
driver_buffers[led.driver].pwm_buffer_dirty = true;
}
}
void is31fl3236_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
for (uint8_t i = 0; i < IS31FL3236_LED_COUNT; i++) {
is31fl3236_set_color(i, red, green, blue);
}
}
void is31fl3236_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
is31fl3236_led_t led;
memcpy_P(&led, (&g_is31fl3236_leds[index]), sizeof(led));
driver_buffers[led.driver].led_control_buffer[led.r] = red ? 0x01 : 0x00;
driver_buffers[led.driver].led_control_buffer[led.g] = green ? 0x01 : 0x00;
driver_buffers[led.driver].led_control_buffer[led.b] = blue ? 0x01 : 0x00;
driver_buffers[led.driver].led_control_buffer_dirty = true;
}
void is31fl3236_update_pwm_buffers(uint8_t index) {
if (driver_buffers[index].pwm_buffer_dirty) {
is31fl3236_write_pwm_buffer(index);
// Load PWM registers and LED Control register data
is31fl3236_write_register(index, IS31FL3236_REG_UPDATE, 0x01);
driver_buffers[index].pwm_buffer_dirty = false;
}
}
void is31fl3236_update_led_control_registers(uint8_t index) {
if (driver_buffers[index].led_control_buffer_dirty) {
for (uint8_t i = 0; i < IS31FL3236_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3236_write_register(index, IS31FL3236_REG_LED_CONTROL + i, driver_buffers[index].led_control_buffer[i]);
}
driver_buffers[index].led_control_buffer_dirty = false;
}
}
void is31fl3236_flush(void) {
for (uint8_t i = 0; i < IS31FL3236_DRIVER_COUNT; i++) {
is31fl3236_update_pwm_buffers(i);
}
}

View File

@ -0,0 +1,103 @@
// Copyright 2024 QMK
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "progmem.h"
#include "util.h"
#define IS31FL3236_REG_SHUTDOWN 0x00
#define IS31FL3236_REG_PWM 0x01
#define IS31FL3236_REG_UPDATE 0x25
#define IS31FL3236_REG_LED_CONTROL 0x26
#define IS31FL3236_REG_GLOBAL_CONTROL 0x4A
#define IS31FL3236_REG_PWM_FREQUENCY 0x4B
#define IS31FL3236_REG_RESET 0x4F
#define IS31FL3236_I2C_ADDRESS_GND 0x3C
#define IS31FL3236_I2C_ADDRESS_SCL 0x3D
#define IS31FL3236_I2C_ADDRESS_SDA 0x3E
#define IS31FL3236_I2C_ADDRESS_VCC 0x3F
#if defined(RGB_MATRIX_IS31FL3236)
# define IS31FL3236_LED_COUNT RGB_MATRIX_LED_COUNT
#endif
#if defined(IS31FL3236_I2C_ADDRESS_4)
# define IS31FL3236_DRIVER_COUNT 4
#elif defined(IS31FL3236_I2C_ADDRESS_3)
# define IS31FL3236_DRIVER_COUNT 3
#elif defined(IS31FL3236_I2C_ADDRESS_2)
# define IS31FL3236_DRIVER_COUNT 2
#elif defined(IS31FL3236_I2C_ADDRESS_1)
# define IS31FL3236_DRIVER_COUNT 1
#endif
typedef struct is31fl3236_led_t {
uint8_t driver : 2;
uint8_t r;
uint8_t g;
uint8_t b;
} PACKED is31fl3236_led_t;
extern const is31fl3236_led_t PROGMEM g_is31fl3236_leds[IS31FL3236_LED_COUNT];
void is31fl3236_init_drivers(void);
void is31fl3236_init(uint8_t index);
void is31fl3236_write_register(uint8_t index, uint8_t reg, uint8_t data);
void is31fl3236_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
void is31fl3236_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
void is31fl3236_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
void is31fl3236_update_pwm_buffers(uint8_t index);
void is31fl3236_update_led_control_registers(uint8_t index);
void is31fl3236_flush(void);
#define IS31FL3236_PWM_FREQUENCY_3K_HZ 0b0
#define IS31FL3236_PWM_FREQUENCY_22K_HZ 0b1
#define OUT1 0x00
#define OUT2 0x01
#define OUT3 0x02
#define OUT4 0x03
#define OUT5 0x04
#define OUT6 0x05
#define OUT7 0x06
#define OUT8 0x07
#define OUT9 0x08
#define OUT10 0x09
#define OUT11 0x0A
#define OUT12 0x0B
#define OUT13 0x0C
#define OUT14 0x0D
#define OUT15 0x0E
#define OUT16 0x0F
#define OUT17 0x10
#define OUT18 0x11
#define OUT19 0x12
#define OUT20 0x13
#define OUT21 0x14
#define OUT22 0x15
#define OUT23 0x16
#define OUT24 0x17
#define OUT25 0x18
#define OUT26 0x19
#define OUT27 0x1A
#define OUT28 0x1B
#define OUT29 0x1C
#define OUT30 0x1D
#define OUT31 0x1E
#define OUT32 0x1F
#define OUT33 0x20
#define OUT34 0x21
#define OUT35 0x22
#define OUT36 0x23

View File

@ -62,6 +62,8 @@
# define WS2812_LED_COUNT RGB_MATRIX_LED_COUNT
#endif
void ws2812_init(void);
/* User Interface
*
* Input:

View File

@ -1,38 +0,0 @@
/* Copyright 2020 Vinam Arora <vinam@posteo.de>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -20,6 +20,12 @@
"build": {
"lto": true
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {

View File

@ -154,7 +154,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_ADJUST] = LAYOUT_ortho_5x12(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
_______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
_______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
_______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______

View File

@ -1 +0,0 @@
# The default 0-Sixty layout - largely based on the Preonic's and Planck's

View File

@ -111,7 +111,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
*/
[_ADJUST] = LAYOUT_ortho_5x12(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
_______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______

View File

@ -1 +0,0 @@
# The default via-supported 0-Sixty layout - largely based on the Preonic's and Planck's

View File

@ -1,39 +0,0 @@
/*
Copyright 2021 0xC7
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -1,92 +0,0 @@
{
"keyboard_name": "61Key",
"manufacturer": "0xC7",
"url": "",
"maintainer": "RealEmanGaming",
"usb": {
"vid": "0xE117",
"pid": "0x6161",
"device_version": "0.0.1"
},
"matrix_pins": {
"cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "F7", "F6", "F5", "F4", "F1", "F0"],
"rows": ["B0", "B1", "B2", "B3", "B7"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
"LAYOUT": "LAYOUT_60_ansi"
},
"layouts": {
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 8], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 9], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -0,0 +1,110 @@
{
"keyboard_name": "61Key",
"manufacturer": "0xC7",
"url": "",
"maintainer": "RealEmanGaming",
"usb": {
"vid": "0xE117",
"pid": "0x6161",
"device_version": "0.0.1"
},
"build": {
"lto": true
},
"features": {
"bootmagic": true,
"command": true,
"console": false,
"extrakey": false,
"key_lock": true,
"mousekey": false,
"nkro": false
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"matrix_pins": {
"cols": ["D0", "D1", "D2", "D3", "D5", "D4", "D6", "D7", "F7", "F6", "F5", "F4", "F1", "F0"],
"rows": ["B0", "B1", "B2", "B3", "B7"]
},
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
"LAYOUT": "LAYOUT_60_ansi"
},
"layouts": {
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 8], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 9], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -1,15 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = no # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
LTO_ENABLE = yes
KEY_LOCK_ENABLE = yes

View File

@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* default setup after eeprom reset */
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_EFFECT_BREATHING + 2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* Oled Size */
#define OLED_DISPLAY_128X64
#define OLED_FONT_END 255

View File

@ -1,77 +0,0 @@
{
"keyboard_name": "1337",
"manufacturer": "0xCB",
"url": "https://0xCB.dev",
"maintainer": "Conor-Burns",
"usb": {
"vid": "0xCB00",
"pid": "0x1337",
"device_version": "0.0.1"
},
"backlight": {
"pin": "B5",
"levels": 7,
"breathing": true
},
"encoder": {
"rotary": [
{"pin_a": "F6", "pin_b": "F5"}
]
},
"qmk": {
"tap_keycode_delay": 10
},
"qmk_lufa_bootloader": {
"led": "B0"
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 4,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
},
"default": {
"hue": 152,
"sat": 232,
"speed": 2
}
},
"ws2812": {
"pin": "D3"
},
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"matrix_pins": {
"direct": [
["D2", "D4", "F4"],
["D7", "B1", "B3"],
["E6", "B4", "B2"]
]
},
"layouts": {
"LAYOUT": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]},
{"x": 1, "y": 0, "matrix": [0, 1]},
{"x": 2, "y": 0, "matrix": [0, 2]},
{"x": 0, "y": 1, "matrix": [1, 0]},
{"x": 1, "y": 1, "matrix": [1, 1]},
{"x": 2, "y": 1, "matrix": [1, 2]},
{"x": 0, "y": 2, "matrix": [2, 0]},
{"x": 1, "y": 2, "matrix": [2, 1]},
{"x": 2, "y": 2, "matrix": [2, 2]}
]
}
}
}

View File

@ -0,0 +1,98 @@
{
"keyboard_name": "1337",
"manufacturer": "0xCB",
"url": "https://0xCB.dev",
"maintainer": "Conor-Burns",
"usb": {
"vid": "0xCB00",
"pid": "0x1337",
"device_version": "0.0.1"
},
"backlight": {
"pin": "B5",
"levels": 7,
"breathing": true
},
"encoder": {
"rotary": [
{"pin_a": "F6", "pin_b": "F5"}
]
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
},
"tap_keycode_delay": 10
},
"qmk_lufa_bootloader": {
"led": "B0"
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 4,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
},
"default": {
"hue": 152,
"sat": 232,
"speed": 2
}
},
"ws2812": {
"pin": "D3"
},
"processor": "atmega32u4",
"bootloader": "qmk-dfu",
"build": {
"lto": true
},
"features": {
"backlight": true,
"bootmagic": true,
"command": false,
"console": false,
"encoder": true,
"extrakey": true,
"mousekey": true,
"nkro": false,
"oled": true,
"rgblight": true
},
"matrix_pins": {
"direct": [
["D2", "D4", "F4"],
["D7", "B1", "B3"],
["E6", "B4", "B2"]
]
},
"layouts": {
"LAYOUT": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]},
{"x": 1, "y": 0, "matrix": [0, 1]},
{"x": 2, "y": 0, "matrix": [0, 2]},
{"x": 0, "y": 1, "matrix": [1, 0]},
{"x": 1, "y": 1, "matrix": [1, 1]},
{"x": 2, "y": 1, "matrix": [1, 2]},
{"x": 0, "y": 2, "matrix": [2, 0]},
{"x": 1, "y": 2, "matrix": [2, 1]},
{"x": 2, "y": 2, "matrix": [2, 2]}
]
}
}
}

View File

@ -1,16 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
LTO_ENABLE = yes
OLED_ENABLE = yes

View File

@ -0,0 +1,27 @@
{
"development_board": "promicro",
"bootloader": "qmk-dfu",
"matrix_pins": {
"cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
"rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
},
"diode_direction": "COL2ROW",
"rgb_matrix": {
"animations": {
"band_sat": true,
"band_spiral_val": true,
"breathing": true,
"cycle_all": true,
"cycle_left_right": true,
"raindrops": true
}
},
"encoder": {
"rotary": [
{"pin_a": "B5", "pin_b": "B6"}
]
},
"ws2812": {
"pin": "D0"
}
}

View File

@ -3,13 +3,6 @@
"keyboard_name": "splaytoraid",
"maintainer": "freya-irl",
"url": "https://github.com/freya-irl/splaytoraid40",
"development_board": "promicro",
"bootloader": "qmk-dfu",
"diode_direction": "COL2ROW",
"matrix_pins": {
"cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
"rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
},
"usb": {
"device_version": "1.0.0",
"pid": "0xCB00",
@ -21,7 +14,8 @@
"bootmagic": true,
"console": true,
"mousekey": true,
"nkro": true
"nkro": true,
"encoder": true
},
"bootmagic": {
"matrix": [1, 0]
@ -29,21 +23,7 @@
"build": {
"lto": true
},
"encoder": {
"enabled": true,
"rotary": [
{"pin_a": "B5", "pin_b": "B6", "resolution": 4}
]
},
"rgb_matrix": {
"animations": {
"breathing": true,
"band_sat": true,
"band_spiral_val": true,
"cycle_all": true,
"raindrops": true,
"cycle_left_right": true
},
"default": {
"animation": "breathing",
"hue": 152,
@ -73,9 +53,6 @@
],
"max_brightness": 200
},
"ws2812": {
"pin": "D0"
},
"layouts": {
"LAYOUT_36": {
"layout": [

View File

@ -1,26 +0,0 @@
{
"rgb_matrix": {
"animations": {
"cycle_up_down": true,
"jellybean_raindrops": true,
"cycle_out_in": true,
"cycle_out_in_dual": true,
"pixel_fractal": true,
"rainbow_moving_chevron": true,
"cycle_pinwheel": true,
"pixel_rain": true,
"dual_beacon": true,
"hue_breathing": true,
"typing_heatmap": true,
"digital_rain": true,
"solid_reactive_simple": true,
"solid_reactive": true,
"splash": true,
"multisplash": true,
"solid_splash": true
}
},
"ws2812": {
"driver": "vendor"
}
}

View File

@ -0,0 +1,44 @@
{
"development_board": "promicro_rp2040",
"matrix_pins": {
"cols": ["GP28", "GP27", "GP26", "GP29", "GP20", "GP22", "GP23"],
"rows": ["GP0", "GP1", "GP2", "GP4", "GP6", "GP7", "GP8", "GP5"]
},
"diode_direction": "COL2ROW",
"rgb_matrix": {
"animations": {
"band_sat": true,
"band_spiral_val": true,
"breathing": true,
"cycle_all": true,
"cycle_left_right": true,
"cycle_out_in": true,
"cycle_out_in_dual": true,
"cycle_pinwheel": true,
"cycle_up_down": true,
"digital_rain": true,
"dual_beacon": true,
"hue_breathing": true,
"jellybean_raindrops": true,
"multisplash": true,
"pixel_fractal": true,
"pixel_rain": true,
"rainbow_moving_chevron": true,
"raindrops": true,
"solid_reactive": true,
"solid_reactive_simple": true,
"solid_splash": true,
"splash": true,
"typing_heatmap": true
}
},
"encoder": {
"rotary": [
{"pin_a": "GP9", "pin_b": "GP21"}
]
},
"ws2812": {
"pin": "GP3",
"driver": "vendor"
}
}

View File

@ -1 +0,0 @@
CONVERT_TO = rp2040_ce

View File

@ -16,11 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* oled custom font */
#define OLED_FONT_END 255
#define OLED_FONT_H "gfxfont.c"

View File

@ -1,132 +0,0 @@
{
"keyboard_name": "Static",
"manufacturer": "0xCB",
"url": "https://0xCB.dev",
"maintainer": "Conor-Burns",
"usb": {
"vid": "0xCB00",
"pid": "0xA455",
"device_version": "0.0.1"
},
"matrix_pins": {
"cols": ["B5", "D4", "C0", "C1", "C2", "C3"],
"rows": ["D5", "D6", "D7", "B0", "B1", "B2", "B3", "B4"]
},
"diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"}
]
},
"qmk": {
"tap_keycode_delay": 10
},
"processor": "atmega328p",
"bootloader": "usbasploader",
"layout_aliases": {
"LAYOUT": "LAYOUT_all"
},
"layouts": {
"LAYOUT_all": {
"layout": [
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 0], "x": 0, "y": 1},
{"matrix": [1, 0], "x": 1, "y": 1},
{"matrix": [0, 1], "x": 2, "y": 1},
{"matrix": [1, 1], "x": 3, "y": 1},
{"matrix": [0, 2], "x": 4, "y": 1},
{"matrix": [1, 2], "x": 5, "y": 1},
{"matrix": [0, 3], "x": 6, "y": 1},
{"matrix": [1, 3], "x": 7, "y": 1},
{"matrix": [0, 4], "x": 8, "y": 1},
{"matrix": [1, 4], "x": 9, "y": 1},
{"matrix": [0, 5], "x": 10, "y": 1},
{"matrix": [3, 5], "x": 11, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 1.25, "y": 2},
{"matrix": [2, 1], "x": 2.25, "y": 2},
{"matrix": [3, 1], "x": 3.25, "y": 2},
{"matrix": [2, 2], "x": 4.25, "y": 2},
{"matrix": [3, 2], "x": 5.25, "y": 2},
{"matrix": [2, 3], "x": 6.25, "y": 2},
{"matrix": [3, 3], "x": 7.25, "y": 2},
{"matrix": [2, 4], "x": 8.25, "y": 2},
{"matrix": [3, 4], "x": 9.25, "y": 2},
{"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
{"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
{"matrix": [4, 1], "x": 1.75, "y": 3},
{"matrix": [5, 1], "x": 2.75, "y": 3},
{"matrix": [4, 2], "x": 3.75, "y": 3},
{"matrix": [5, 2], "x": 4.75, "y": 3},
{"matrix": [4, 3], "x": 5.75, "y": 3},
{"matrix": [5, 3], "x": 6.75, "y": 3},
{"matrix": [4, 4], "x": 7.75, "y": 3},
{"matrix": [5, 4], "x": 8.75, "y": 3},
{"matrix": [4, 5], "x": 9.75, "y": 3},
{"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
{"matrix": [6, 0], "x": 0, "y": 4},
{"matrix": [7, 0], "x": 1, "y": 4},
{"matrix": [6, 1], "x": 2, "y": 4},
{"matrix": [7, 1], "x": 3, "y": 4, "w": 2.75},
{"matrix": [7, 2], "x": 5.75, "y": 4},
{"matrix": [6, 4], "x": 6.75, "y": 4, "w": 2.25},
{"matrix": [7, 4], "x": 9, "y": 4},
{"matrix": [6, 5], "x": 10, "y": 4},
{"matrix": [7, 5], "x": 11, "y": 4}
]
},
"LAYOUT_bigbar": {
"layout": [
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 0], "x": 0, "y": 1},
{"matrix": [1, 0], "x": 1, "y": 1},
{"matrix": [0, 1], "x": 2, "y": 1},
{"matrix": [1, 1], "x": 3, "y": 1},
{"matrix": [0, 2], "x": 4, "y": 1},
{"matrix": [1, 2], "x": 5, "y": 1},
{"matrix": [0, 3], "x": 6, "y": 1},
{"matrix": [1, 3], "x": 7, "y": 1},
{"matrix": [0, 4], "x": 8, "y": 1},
{"matrix": [1, 4], "x": 9, "y": 1},
{"matrix": [0, 5], "x": 10, "y": 1},
{"matrix": [3, 5], "x": 11, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 1.25, "y": 2},
{"matrix": [2, 1], "x": 2.25, "y": 2},
{"matrix": [3, 1], "x": 3.25, "y": 2},
{"matrix": [2, 2], "x": 4.25, "y": 2},
{"matrix": [3, 2], "x": 5.25, "y": 2},
{"matrix": [2, 3], "x": 6.25, "y": 2},
{"matrix": [3, 3], "x": 7.25, "y": 2},
{"matrix": [2, 4], "x": 8.25, "y": 2},
{"matrix": [3, 4], "x": 9.25, "y": 2},
{"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
{"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
{"matrix": [4, 1], "x": 1.75, "y": 3},
{"matrix": [5, 1], "x": 2.75, "y": 3},
{"matrix": [4, 2], "x": 3.75, "y": 3},
{"matrix": [5, 2], "x": 4.75, "y": 3},
{"matrix": [4, 3], "x": 5.75, "y": 3},
{"matrix": [5, 3], "x": 6.75, "y": 3},
{"matrix": [4, 4], "x": 7.75, "y": 3},
{"matrix": [5, 4], "x": 8.75, "y": 3},
{"matrix": [4, 5], "x": 9.75, "y": 3},
{"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
{"matrix": [6, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [7, 0], "x": 1.25, "y": 4},
{"matrix": [6, 1], "x": 2.25, "y": 4},
{"matrix": [7, 2], "x": 3.25, "y": 4, "w": 6.25},
{"matrix": [6, 5], "x": 9.5, "y": 4, "w": 1.25},
{"matrix": [7, 5], "x": 10.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -0,0 +1,149 @@
{
"keyboard_name": "Static",
"manufacturer": "0xCB",
"url": "https://0xCB.dev",
"maintainer": "Conor-Burns",
"usb": {
"vid": "0xCB00",
"pid": "0xA455",
"device_version": "0.0.1"
},
"build": {
"lto": true
},
"features": {
"bootmagic": true,
"command": false,
"console": false,
"encoder": true,
"extrakey": true,
"mousekey": true,
"nkro": false,
"oled": true
},
"matrix_pins": {
"cols": ["B5", "D4", "C0", "C1", "C2", "C3"],
"rows": ["D5", "D6", "D7", "B0", "B1", "B2", "B3", "B4"]
},
"diode_direction": "COL2ROW",
"encoder": {
"rotary": [
{"pin_a": "D0", "pin_b": "D1"}
]
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
},
"tap_keycode_delay": 10
},
"processor": "atmega328p",
"bootloader": "usbasploader",
"layout_aliases": {
"LAYOUT": "LAYOUT_all"
},
"layouts": {
"LAYOUT_all": {
"layout": [
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 0], "x": 0, "y": 1},
{"matrix": [1, 0], "x": 1, "y": 1},
{"matrix": [0, 1], "x": 2, "y": 1},
{"matrix": [1, 1], "x": 3, "y": 1},
{"matrix": [0, 2], "x": 4, "y": 1},
{"matrix": [1, 2], "x": 5, "y": 1},
{"matrix": [0, 3], "x": 6, "y": 1},
{"matrix": [1, 3], "x": 7, "y": 1},
{"matrix": [0, 4], "x": 8, "y": 1},
{"matrix": [1, 4], "x": 9, "y": 1},
{"matrix": [0, 5], "x": 10, "y": 1},
{"matrix": [3, 5], "x": 11, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 1.25, "y": 2},
{"matrix": [2, 1], "x": 2.25, "y": 2},
{"matrix": [3, 1], "x": 3.25, "y": 2},
{"matrix": [2, 2], "x": 4.25, "y": 2},
{"matrix": [3, 2], "x": 5.25, "y": 2},
{"matrix": [2, 3], "x": 6.25, "y": 2},
{"matrix": [3, 3], "x": 7.25, "y": 2},
{"matrix": [2, 4], "x": 8.25, "y": 2},
{"matrix": [3, 4], "x": 9.25, "y": 2},
{"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
{"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
{"matrix": [4, 1], "x": 1.75, "y": 3},
{"matrix": [5, 1], "x": 2.75, "y": 3},
{"matrix": [4, 2], "x": 3.75, "y": 3},
{"matrix": [5, 2], "x": 4.75, "y": 3},
{"matrix": [4, 3], "x": 5.75, "y": 3},
{"matrix": [5, 3], "x": 6.75, "y": 3},
{"matrix": [4, 4], "x": 7.75, "y": 3},
{"matrix": [5, 4], "x": 8.75, "y": 3},
{"matrix": [4, 5], "x": 9.75, "y": 3},
{"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
{"matrix": [6, 0], "x": 0, "y": 4},
{"matrix": [7, 0], "x": 1, "y": 4},
{"matrix": [6, 1], "x": 2, "y": 4},
{"matrix": [7, 1], "x": 3, "y": 4, "w": 2.75},
{"matrix": [7, 2], "x": 5.75, "y": 4},
{"matrix": [6, 4], "x": 6.75, "y": 4, "w": 2.25},
{"matrix": [7, 4], "x": 9, "y": 4},
{"matrix": [6, 5], "x": 10, "y": 4},
{"matrix": [7, 5], "x": 11, "y": 4}
]
},
"LAYOUT_bigbar": {
"layout": [
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 0], "x": 0, "y": 1},
{"matrix": [1, 0], "x": 1, "y": 1},
{"matrix": [0, 1], "x": 2, "y": 1},
{"matrix": [1, 1], "x": 3, "y": 1},
{"matrix": [0, 2], "x": 4, "y": 1},
{"matrix": [1, 2], "x": 5, "y": 1},
{"matrix": [0, 3], "x": 6, "y": 1},
{"matrix": [1, 3], "x": 7, "y": 1},
{"matrix": [0, 4], "x": 8, "y": 1},
{"matrix": [1, 4], "x": 9, "y": 1},
{"matrix": [0, 5], "x": 10, "y": 1},
{"matrix": [3, 5], "x": 11, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 1.25, "y": 2},
{"matrix": [2, 1], "x": 2.25, "y": 2},
{"matrix": [3, 1], "x": 3.25, "y": 2},
{"matrix": [2, 2], "x": 4.25, "y": 2},
{"matrix": [3, 2], "x": 5.25, "y": 2},
{"matrix": [2, 3], "x": 6.25, "y": 2},
{"matrix": [3, 3], "x": 7.25, "y": 2},
{"matrix": [2, 4], "x": 8.25, "y": 2},
{"matrix": [3, 4], "x": 9.25, "y": 2},
{"matrix": [2, 5], "x": 10.25, "y": 2, "w": 1.75},
{"matrix": [4, 0], "x": 0, "y": 3, "w": 1.75},
{"matrix": [4, 1], "x": 1.75, "y": 3},
{"matrix": [5, 1], "x": 2.75, "y": 3},
{"matrix": [4, 2], "x": 3.75, "y": 3},
{"matrix": [5, 2], "x": 4.75, "y": 3},
{"matrix": [4, 3], "x": 5.75, "y": 3},
{"matrix": [5, 3], "x": 6.75, "y": 3},
{"matrix": [4, 4], "x": 7.75, "y": 3},
{"matrix": [5, 4], "x": 8.75, "y": 3},
{"matrix": [4, 5], "x": 9.75, "y": 3},
{"matrix": [5, 5], "x": 10.75, "y": 3, "w": 1.25},
{"matrix": [6, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [7, 0], "x": 1.25, "y": 4},
{"matrix": [6, 1], "x": 2.25, "y": 4},
{"matrix": [7, 2], "x": 3.25, "y": 4, "w": 6.25},
{"matrix": [6, 5], "x": 9.5, "y": 4, "w": 1.25},
{"matrix": [7, 5], "x": 10.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -1,16 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
LTO_ENABLE = yes
OLED_ENABLE = yes

View File

@ -1,57 +0,0 @@
{
"keyboard_name": "TutelPad",
"manufacturer": "ItsFiremanSam",
"url": "",
"maintainer": "ItsFiremanSam",
"usb": {
"vid": "0xCB00",
"pid": "0xF09F",
"device_version": "0.0.1"
},
"bootmagic": {
"matrix": [1, 0]
},
"rgblight": {
"hue_steps": 10,
"led_count": 4,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "D3"
},
"processor": "atmega32u4",
"bootloader": "caterina",
"matrix_pins": {
"direct": [
["E6", "D7", "B1", "B3"],
["B5", "B4", "B2", "B6"]
]
},
"layouts": {
"LAYOUT": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]},
{"x": 1, "y": 0, "matrix": [0, 1]},
{"x": 2, "y": 0, "matrix": [0, 2]},
{"x": 3, "y": 0, "matrix": [0, 3]},
{"x": 0, "y": 1, "matrix": [1, 0]},
{"x": 1, "y": 1, "matrix": [1, 1]},
{"x": 2, "y": 1, "matrix": [1, 2]},
{"x": 3, "y": 1, "matrix": [1, 3]}
]
}
}
}

View File

@ -0,0 +1,67 @@
{
"keyboard_name": "TutelPad",
"manufacturer": "ItsFiremanSam",
"url": "",
"maintainer": "ItsFiremanSam",
"usb": {
"vid": "0xCB00",
"pid": "0xF09F",
"device_version": "0.0.1"
},
"bootmagic": {
"matrix": [1, 0]
},
"rgblight": {
"hue_steps": 10,
"led_count": 4,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "D3"
},
"processor": "atmega32u4",
"bootloader": "caterina",
"features": {
"bootmagic": true,
"command": false,
"console": false,
"extrakey": true,
"mousekey": false,
"nkro": false,
"oled": true,
"rgblight": true
},
"matrix_pins": {
"direct": [
["E6", "D7", "B1", "B3"],
["B5", "B4", "B2", "B6"]
]
},
"layouts": {
"LAYOUT": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]},
{"x": 1, "y": 0, "matrix": [0, 1]},
{"x": 2, "y": 0, "matrix": [0, 2]},
{"x": 3, "y": 0, "matrix": [0, 3]},
{"x": 0, "y": 1, "matrix": [1, 0]},
{"x": 1, "y": 1, "matrix": [1, 1]},
{"x": 2, "y": 1, "matrix": [1, 2]},
{"x": 3, "y": 1, "matrix": [1, 3]}
]
}
}
}

View File

@ -1,13 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
OLED_ENABLE = yes

View File

@ -1,63 +0,0 @@
{
"keyboard_name": "10bleoledhub",
"manufacturer": "haierwangwei2005",
"url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
"maintainer": "haierwangwei2005",
"usb": {
"vid": "0x7C88",
"pid": "0x7C99",
"device_version": "0.0.1"
},
"bluetooth": {
"driver": "bluefruit_le"
},
"rgblight": {
"led_count": 4,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "B7"
},
"matrix_pins": {
"cols": ["D6", "D7", "B5"],
"rows": ["F0", "F5", "F4", "F6"]
},
"diode_direction": "ROW2COL",
"encoder": {
"rotary": [
{"pin_a": "C7", "pin_b": "F7"}
]
},
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
"LAYOUT": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0, "w": 0.8, "h": 0.8},
{"matrix": [1, 0], "x": 0, "y": 1},
{"matrix": [1, 1], "x": 1, "y": 1},
{"matrix": [1, 2], "x": 2, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2},
{"matrix": [2, 1], "x": 1, "y": 2},
{"matrix": [2, 2], "x": 2, "y": 2},
{"matrix": [3, 0], "x": 0, "y": 3},
{"matrix": [3, 1], "x": 1, "y": 3},
{"matrix": [3, 2], "x": 2, "y": 3}
]
}
}
}

View File

@ -0,0 +1,72 @@
{
"keyboard_name": "10bleoledhub",
"manufacturer": "haierwangwei2005",
"url": "https://github.com/haierwangwei2005/10BLE-OLED-HUB",
"maintainer": "haierwangwei2005",
"usb": {
"vid": "0x7C88",
"pid": "0x7C99",
"device_version": "0.0.1"
},
"features": {
"bluetooth": true,
"bootmagic": true,
"encoder": true,
"extrakey": true,
"mousekey": true,
"nkro": false,
"oled": true
},
"bluetooth": {
"driver": "bluefruit_le"
},
"rgblight": {
"led_count": 4,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "B7"
},
"matrix_pins": {
"cols": ["D6", "D7", "B5"],
"rows": ["F0", "F5", "F4", "F6"]
},
"diode_direction": "ROW2COL",
"encoder": {
"rotary": [
{"pin_a": "C7", "pin_b": "F7"}
]
},
"processor": "atmega32u4",
"bootloader": "caterina",
"layouts": {
"LAYOUT": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0, "w": 0.8, "h": 0.8},
{"matrix": [1, 0], "x": 0, "y": 1},
{"matrix": [1, 1], "x": 1, "y": 1},
{"matrix": [1, 2], "x": 2, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2},
{"matrix": [2, 1], "x": 1, "y": 2},
{"matrix": [2, 2], "x": 2, "y": 2},
{"matrix": [3, 0], "x": 0, "y": 3},
{"matrix": [3, 1], "x": 1, "y": 3},
{"matrix": [3, 2], "x": 2, "y": 3}
]
}
}
}

View File

@ -1,18 +1,2 @@
# Processor frequency
F_CPU = 8000000
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
BLUETOOTH_ENABLE = yes
OLED_ENABLE = yes
ENCODER_ENABLE = yes

View File

@ -1,29 +0,0 @@
{
"keyboard_name": "1K",
"manufacturer": "MakotoKurauchi",
"url": "",
"maintainer": "MakotoKurauchi",
"usb": {
"vid": "0x0009",
"pid": "0x0001",
"device_version": "0.0.1"
},
"rgblight": {
"led_count": 1
},
"ws2812": {
"pin": "B2"
},
"matrix_pins": {
"direct": [
["B0"]
]
},
"layouts": {
"LAYOUT_ortho_1x1": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]}
]
}
}
}

View File

@ -0,0 +1,39 @@
{
"keyboard_name": "1K",
"manufacturer": "MakotoKurauchi",
"url": "",
"maintainer": "MakotoKurauchi",
"usb": {
"vid": "0x0009",
"pid": "0x0001",
"device_version": "0.0.1"
},
"processor": "attiny85",
"bootloader": "custom",
"build": {
"lto": true
},
"features": {
"grave_esc": false,
"magic": false,
"space_cadet": false
},
"rgblight": {
"led_count": 1
},
"ws2812": {
"pin": "B2"
},
"matrix_pins": {
"direct": [
["B0"]
]
},
"layouts": {
"LAYOUT_ortho_1x1": {
"layout": [
{"x": 0, "y": 0, "matrix": [0, 0]}
]
}
}
}

View File

@ -21,5 +21,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void keyboard_post_init_user(void) {
rgblite_init();
rgblite_increase_hue();
}

View File

@ -6,6 +6,10 @@
#include "ws2812.h"
#include "color.h"
static inline void rgblite_init(void) {
ws2812_init();
}
static inline void rgblite_setrgb(RGB rgb) {
rgb_led_t leds[RGBLIGHT_LED_COUNT] = {{.r = rgb.r, .g = rgb.g, .b = rgb.b}};
ws2812_setleds(leds, RGBLIGHT_LED_COUNT);

View File

@ -1,26 +1,2 @@
# MCU name
MCU = attiny85
# Bootloader selection
BOOTLOADER = custom
BOOTLOADER_SIZE = 1862
PROGRAM_CMD = micronucleus --run $(BUILD_DIR)/$(TARGET).hex
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = no # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
# Save as much space as we can...
LTO_ENABLE = yes
GRAVE_ESC_ENABLE = no
MAGIC_ENABLE = no
SPACE_CADET_ENABLE = no

View File

@ -1,39 +0,0 @@
/*
Copyright 2018 MechMerlin
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

View File

@ -1,116 +0,0 @@
{
"keyboard_name": "1up60hse",
"manufacturer": "1upkeyboards",
"url": "",
"maintainer": "qmk",
"usb": {
"vid": "0x6F75",
"pid": "0x6873",
"device_version": "0.0.1"
},
"matrix_pins": {
"cols": ["C7", "F7", "F6", "F5", "F4", "F1", "E6", "D1", "D0", "D2", "D3", "D5", "D6", "D7"],
"rows": ["B3", "B2", "B1", "B0", "D4"]
},
"diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
"breathing": true
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 14,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "F0"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi"],
"layouts": {
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 9], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 10], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -0,0 +1,135 @@
{
"keyboard_name": "1up60hse",
"manufacturer": "1upkeyboards",
"url": "",
"maintainer": "qmk",
"usb": {
"vid": "0x6F75",
"pid": "0x6873",
"device_version": "0.0.1"
},
"build": {
"lto": true
},
"features": {
"backlight": true,
"bootmagic": true,
"command": true,
"console": true,
"extrakey": true,
"mousekey": false,
"nkro": true,
"rgblight": true
},
"matrix_pins": {
"cols": ["C7", "F7", "F6", "F5", "F4", "F1", "E6", "D1", "D0", "D2", "D3", "D5", "D6", "D7"],
"rows": ["B3", "B2", "B1", "B0", "D4"]
},
"diode_direction": "COL2ROW",
"backlight": {
"pin": "B7",
"levels": 5,
"breathing": true
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 14,
"sleep": true,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "F0"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi"],
"layouts": {
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 5], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 9], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 10], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 13.75, "y": 4, "w": 1.25}
]
}
}
}

View File

@ -1,4 +0,0 @@
# 1up60hse default keymap generated by QMK Configurator
This is the keymap used by [QMK Configurator](https://config.qmk.fm/#/1upkeyboards/1up60hse/LAYOUT_60_ansi) as default.

View File

@ -1 +0,0 @@
# 1up60hse via keymap

View File

@ -1,13 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
LTO_ENABLE = yes

View File

@ -1,25 +0,0 @@
/*
Copyright 2019 Bubnick
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View File

@ -1,189 +0,0 @@
{
"keyboard_name": "1up60hte",
"manufacturer": "1upkeyboards",
"url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/",
"maintainer": "1upkeyboards",
"usb": {
"vid": "0x6F75",
"pid": "0x6874",
"device_version": "0.0.1"
},
"matrix_pins": {
"cols": ["F6", "F5", "F4", "F1", "E6", "D0", "D1", "D2", "D3", "D5", "D6", "D7", "B4", "B5"],
"rows": ["B3", "B2", "B1", "B0", "D4"]
},
"diode_direction": "COL2ROW",
"backlight": {
"pin": "B7"
},
"indicators": {
"caps_lock": "B6",
"on_state": 0
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 14,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "F0"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
"LAYOUT_tsangan": "LAYOUT_60_tsangan_hhkb"
},
"community_layouts": ["60_hhkb", "60_tsangan_hhkb"],
"layouts": {
"LAYOUT_60_tsangan_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [4, 13], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 12], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 10], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 12.5, "y": 4},
{"matrix": [4, 12], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [4, 13], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 12], "x": 14, "y": 3},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 10], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 12.5, "y": 4}
]
}
}
}

View File

@ -0,0 +1,208 @@
{
"keyboard_name": "1up60hte",
"manufacturer": "1upkeyboards",
"url": "https://www.1upkeyboards.com/shop/controllers/1up-rgb-60-pcb-hte/",
"maintainer": "1upkeyboards",
"usb": {
"vid": "0x6F75",
"pid": "0x6874",
"device_version": "0.0.1"
},
"build": {
"lto": true
},
"features": {
"backlight": true,
"bootmagic": true,
"command": false,
"console": false,
"extrakey": true,
"mousekey": true,
"nkro": true,
"rgblight": true
},
"matrix_pins": {
"cols": ["F6", "F5", "F4", "F1", "E6", "D0", "D1", "D2", "D3", "D5", "D6", "D7", "B4", "B5"],
"rows": ["B3", "B2", "B1", "B0", "D4"]
},
"diode_direction": "COL2ROW",
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"backlight": {
"pin": "B7"
},
"indicators": {
"caps_lock": "B6",
"on_state": 0
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 14,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "F0"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"layout_aliases": {
"LAYOUT_tsangan": "LAYOUT_60_tsangan_hhkb"
},
"community_layouts": ["60_hhkb", "60_tsangan_hhkb"],
"layouts": {
"LAYOUT_60_tsangan_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [4, 13], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 12], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 10], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 12.5, "y": 4},
{"matrix": [4, 12], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [4, 13], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 12], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 1], "x": 2.25, "y": 3},
{"matrix": [3, 2], "x": 3.25, "y": 3},
{"matrix": [3, 3], "x": 4.25, "y": 3},
{"matrix": [3, 4], "x": 5.25, "y": 3},
{"matrix": [3, 5], "x": 6.25, "y": 3},
{"matrix": [3, 6], "x": 7.25, "y": 3},
{"matrix": [3, 7], "x": 8.25, "y": 3},
{"matrix": [3, 8], "x": 9.25, "y": 3},
{"matrix": [3, 9], "x": 10.25, "y": 3},
{"matrix": [3, 10], "x": 11.25, "y": 3},
{"matrix": [3, 11], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 12], "x": 14, "y": 3},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 10], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 12.5, "y": 4}
]
}
}
}

View File

@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[1] = LAYOUT_60_tsangan_hhkb(
QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
KC_CAPS, BL_TOGG, BL_DOWN, BL_UP, BL_STEP, _______, _______, _______, _______, KC_SCRL, KC_PAUS, KC_UP, _______, KC_CLR,
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, _______, _______,

View File

@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[1] = LAYOUT_60_tsangan_hhkb(
QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
QK_BOOT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
KC_CAPS, BL_TOGG, BL_DOWN, BL_UP, BL_STEP, _______, _______, _______, _______, KC_SCRL, KC_PAUS, KC_UP, _______, KC_CLR,
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, RGB_VAD, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, KC_END, KC_PGDN, KC_DOWN, _______, _______,

View File

@ -1,14 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
LTO_ENABLE = yes

View File

@ -1,7 +0,0 @@
#pragma once
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

View File

@ -1,535 +0,0 @@
{
"keyboard_name": "1UP RGB Underglow PCB",
"manufacturer": "1upkeyboards",
"url": "",
"maintainer": "qmk",
"usb": {
"vid": "0x6F75",
"pid": "0x7267",
"device_version": "0.0.1"
},
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
"rows": ["D0", "D1", "D2", "D3", "D5"]
},
"diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 5
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 16,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "E2"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_iso", "60_ansi_split_bs_rshift", "60_hhkb"],
"layouts": {
"LAYOUT_all": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2},
{"matrix": [2, 14], "x": 13.75, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25},
{"matrix": [3, 1], "x": 1.25, "y": 3},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_iso": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2},
{"matrix": [2, 14], "x": 13.75, "y": 1, "w": 1.25, "h": 2},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25},
{"matrix": [3, 1], "x": 1.25, "y": 3},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi_split_bs_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 6},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 11.5, "y": 4},
{"matrix": [4, 13], "x": 12.5, "y": 4},
{"matrix": [4, 14], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_ansi_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi_tsangan_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 13], "x": 12.5, "y": 4},
{"matrix": [4, 14], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 13], "x": 12.5, "y": 4}
]
}
}
}

View File

@ -0,0 +1,551 @@
{
"keyboard_name": "1UP RGB Underglow PCB",
"manufacturer": "1upkeyboards",
"url": "",
"maintainer": "qmk",
"usb": {
"vid": "0x6F75",
"pid": "0x7267",
"device_version": "0.0.1"
},
"features": {
"backlight": true,
"bootmagic": true,
"command": false,
"console": false,
"extrakey": true,
"mousekey": true,
"nkro": true,
"rgblight": true
},
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"matrix_pins": {
"cols": ["F0", "F1", "E6", "C7", "C6", "B7", "D4", "B1", "B0", "B5", "B4", "D7", "D6", "B3", "F4"],
"rows": ["D0", "D1", "D2", "D3", "D5"]
},
"diode_direction": "COL2ROW",
"backlight": {
"pin": "B6",
"levels": 5
},
"rgblight": {
"saturation_steps": 8,
"brightness_steps": 8,
"led_count": 16,
"animations": {
"breathing": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"snake": true,
"knight": true,
"christmas": true,
"static_gradient": true,
"rgb_test": true,
"alternating": true,
"twinkle": true
}
},
"ws2812": {
"pin": "E2"
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["60_ansi", "60_iso", "60_ansi_split_bs_rshift", "60_hhkb"],
"layouts": {
"LAYOUT_all": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2},
{"matrix": [2, 14], "x": 13.75, "y": 2, "w": 1.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25},
{"matrix": [3, 1], "x": 1.25, "y": 3},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_iso": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2},
{"matrix": [2, 14], "x": 13.75, "y": 1, "w": 1.25, "h": 2},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25},
{"matrix": [3, 1], "x": 1.25, "y": 3},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi_split_bs_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 6},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.5},
{"matrix": [4, 11], "x": 11.5, "y": 4},
{"matrix": [4, 13], "x": 12.5, "y": 4},
{"matrix": [4, 14], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_ansi_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 14], "x": 13.75, "y": 4, "w": 1.25}
]
},
"LAYOUT_60_ansi_tsangan_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 14], "x": 13, "y": 0, "w": 2},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 13], "x": 12.5, "y": 4},
{"matrix": [4, 14], "x": 13.5, "y": 4, "w": 1.5}
]
},
"LAYOUT_60_hhkb": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [0, 13], "x": 13, "y": 0},
{"matrix": [0, 14], "x": 14, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 2], "x": 1.5, "y": 1},
{"matrix": [1, 3], "x": 2.5, "y": 1},
{"matrix": [1, 4], "x": 3.5, "y": 1},
{"matrix": [1, 5], "x": 4.5, "y": 1},
{"matrix": [1, 6], "x": 5.5, "y": 1},
{"matrix": [1, 7], "x": 6.5, "y": 1},
{"matrix": [1, 8], "x": 7.5, "y": 1},
{"matrix": [1, 9], "x": 8.5, "y": 1},
{"matrix": [1, 10], "x": 9.5, "y": 1},
{"matrix": [1, 11], "x": 10.5, "y": 1},
{"matrix": [1, 12], "x": 11.5, "y": 1},
{"matrix": [1, 13], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 2], "x": 1.75, "y": 2},
{"matrix": [2, 3], "x": 2.75, "y": 2},
{"matrix": [2, 4], "x": 3.75, "y": 2},
{"matrix": [2, 5], "x": 4.75, "y": 2},
{"matrix": [2, 6], "x": 5.75, "y": 2},
{"matrix": [2, 7], "x": 6.75, "y": 2},
{"matrix": [2, 8], "x": 7.75, "y": 2},
{"matrix": [2, 9], "x": 8.75, "y": 2},
{"matrix": [2, 10], "x": 9.75, "y": 2},
{"matrix": [2, 11], "x": 10.75, "y": 2},
{"matrix": [2, 12], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 13], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 14], "x": 14, "y": 3},
{"matrix": [4, 1], "x": 1.5, "y": 4},
{"matrix": [4, 3], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [4, 6], "x": 4, "y": 4, "w": 7},
{"matrix": [4, 11], "x": 11, "y": 4, "w": 1.5},
{"matrix": [4, 13], "x": 12.5, "y": 4}
]
}
}
}

View File

@ -1,12 +0,0 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = yes

View File

@ -1,137 +0,0 @@
{
"manufacturer": "1upkeyboards",
"keyboard_name": "1upocarina",
"maintainer": "ziptyze",
"processor": "RP2040",
"bootloader": "rp2040",
"board": "GENERIC_RP_RP2040",
"usb": {
"device_version": "1.0.0",
"pid": "0x5607",
"vid": "0x6F75"
},
"dynamic_keymap": {
"layer_count": 10
},
"features": {
"bootmagic": true,
"command": false,
"console": false,
"encoder": true,
"extrakey": true,
"mousekey": true,
"nkro": false,
"rgb_matrix": true
},
"encoder": {
"enabled": true,
"rotary": [
{
"pin_a": "GP25", "pin_b": "GP26"
}
]
},
"matrix_pins": {
"direct": [
["GP28", "GP29", "GP27", "GP1", "GP2"]
]
},
"ws2812": {
"driver": "vendor",
"pin": "GP24"
},
"rgb_matrix": {
"animations": {
"gradient_left_right": true,
"breathing": true,
"band_sat": true,
"band_val": true,
"band_pinwheel_sat": true,
"band_pinwheel_val": true,
"band_spiral_sat": true,
"band_spiral_val": true,
"cycle_all": true,
"cycle_left_right": true,
"cycle_up_down": true,
"rainbow_moving_chevron": true,
"cycle_out_in": true,
"cycle_out_in_dual": true,
"cycle_pinwheel": true,
"cycle_spiral": true,
"dual_beacon": true,
"rainbow_beacon": true,
"rainbow_pinwheels": true,
"raindrops": true,
"jellybean_raindrops": true,
"hue_breathing": true,
"hue_pendulum": true,
"hue_wave": true,
"typing_heatmap": true,
"solid_reactive_simple": true,
"solid_reactive": true,
"solid_reactive_wide": true,
"solid_reactive_multiwide": true,
"solid_reactive_cross": true,
"solid_reactive_multicross": true,
"solid_reactive_nexus": true,
"solid_reactive_multinexus": true,
"splash": true,
"multisplash": true,
"solid_splash": true,
"solid_multisplash": true
},
"driver": "ws2812",
"layout": [
{ "flags": 4, "matrix": [0, 0], "x": 23, "y": 26 },
{ "flags": 4, "matrix": [0, 1], "x": 62, "y": 26 },
{ "flags": 4, "matrix": [0, 2], "x": 112, "y": 34 },
{ "flags": 4, "matrix": [0, 3], "x": 161, "y": 26 },
{ "flags": 4, "matrix": [0, 4], "x": 200, "y": 26 },
{ "flags": 2, "x": 133, "y": 3 },
{ "flags": 2, "x": 154, "y": 3 },
{ "flags": 2, "x": 174, "y": 3 },
{ "flags": 2, "x": 194, "y": 3 },
{ "flags": 2, "x": 218, "y": 5 },
{ "flags": 2, "x": 221, "y": 19 },
{ "flags": 2, "x": 221, "y": 31 },
{ "flags": 2, "x": 221, "y": 44 },
{ "flags": 2, "x": 217, "y": 58 },
{ "flags": 2, "x": 195, "y": 61 },
{ "flags": 2, "x": 174, "y": 61 },
{ "flags": 2, "x": 154, "y": 61 },
{ "flags": 2, "x": 133, "y": 61 },
{ "flags": 2, "x": 112, "y": 61 },
{ "flags": 2, "x": 91, "y": 61 },
{ "flags": 2, "x": 70, "y": 61 },
{ "flags": 2, "x": 49, "y": 61 },
{ "flags": 2, "x": 28, "y": 61 },
{ "flags": 2, "x": 5, "y": 58 },
{ "flags": 2, "x": 2, "y": 44 },
{ "flags": 2, "x": 2, "y": 31 },
{ "flags": 2, "x": 2, "y": 19 },
{ "flags": 2, "x": 5, "y": 5 },
{ "flags": 2, "x": 28, "y": 3 },
{ "flags": 2, "x": 49, "y": 3 },
{ "flags": 2, "x": 70, "y": 3 },
{ "flags": 2, "x": 91, "y": 3 }
],
"sleep": true
},
"layouts": {
"LAYOUT_1x5": {
"layout": [
{ "label": "z", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 },
{ "label": "x", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 },
{ "label": "esc", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 },
{ "label": "c", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 },
{ "label": "v", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }
]
}
}
}

View File

@ -0,0 +1,137 @@
{
"manufacturer": "1upkeyboards",
"keyboard_name": "1upocarina",
"maintainer": "ziptyze",
"processor": "RP2040",
"bootloader": "rp2040",
"board": "GENERIC_RP_RP2040",
"usb": {
"device_version": "1.0.0",
"pid": "0x5607",
"vid": "0x6F75"
},
"dynamic_keymap": {
"layer_count": 10
},
"features": {
"bootmagic": true,
"command": false,
"console": false,
"encoder": true,
"extrakey": true,
"mousekey": true,
"nkro": false,
"rgb_matrix": true
},
"encoder": {
"enabled": true,
"rotary": [
{
"pin_a": "GP25", "pin_b": "GP26"
}
]
},
"matrix_pins": {
"direct": [
["GP28", "GP29", "GP27", "GP1", "GP2"]
]
},
"ws2812": {
"driver": "vendor",
"pin": "GP24"
},
"rgb_matrix": {
"animations": {
"gradient_left_right": true,
"breathing": true,
"band_sat": true,
"band_val": true,
"band_pinwheel_sat": true,
"band_pinwheel_val": true,
"band_spiral_sat": true,
"band_spiral_val": true,
"cycle_all": true,
"cycle_left_right": true,
"cycle_up_down": true,
"rainbow_moving_chevron": true,
"cycle_out_in": true,
"cycle_out_in_dual": true,
"cycle_pinwheel": true,
"cycle_spiral": true,
"dual_beacon": true,
"rainbow_beacon": true,
"rainbow_pinwheels": true,
"raindrops": true,
"jellybean_raindrops": true,
"hue_breathing": true,
"hue_pendulum": true,
"hue_wave": true,
"typing_heatmap": true,
"solid_reactive_simple": true,
"solid_reactive": true,
"solid_reactive_wide": true,
"solid_reactive_multiwide": true,
"solid_reactive_cross": true,
"solid_reactive_multicross": true,
"solid_reactive_nexus": true,
"solid_reactive_multinexus": true,
"splash": true,
"multisplash": true,
"solid_splash": true,
"solid_multisplash": true
},
"driver": "ws2812",
"layout": [
{ "flags": 4, "matrix": [0, 0], "x": 23, "y": 26 },
{ "flags": 4, "matrix": [0, 1], "x": 62, "y": 26 },
{ "flags": 4, "matrix": [0, 2], "x": 112, "y": 34 },
{ "flags": 4, "matrix": [0, 3], "x": 161, "y": 26 },
{ "flags": 4, "matrix": [0, 4], "x": 200, "y": 26 },
{ "flags": 2, "x": 133, "y": 3 },
{ "flags": 2, "x": 154, "y": 3 },
{ "flags": 2, "x": 174, "y": 3 },
{ "flags": 2, "x": 194, "y": 3 },
{ "flags": 2, "x": 218, "y": 5 },
{ "flags": 2, "x": 221, "y": 19 },
{ "flags": 2, "x": 221, "y": 31 },
{ "flags": 2, "x": 221, "y": 44 },
{ "flags": 2, "x": 217, "y": 58 },
{ "flags": 2, "x": 195, "y": 61 },
{ "flags": 2, "x": 174, "y": 61 },
{ "flags": 2, "x": 154, "y": 61 },
{ "flags": 2, "x": 133, "y": 61 },
{ "flags": 2, "x": 112, "y": 61 },
{ "flags": 2, "x": 91, "y": 61 },
{ "flags": 2, "x": 70, "y": 61 },
{ "flags": 2, "x": 49, "y": 61 },
{ "flags": 2, "x": 28, "y": 61 },
{ "flags": 2, "x": 5, "y": 58 },
{ "flags": 2, "x": 2, "y": 44 },
{ "flags": 2, "x": 2, "y": 31 },
{ "flags": 2, "x": 2, "y": 19 },
{ "flags": 2, "x": 5, "y": 5 },
{ "flags": 2, "x": 28, "y": 3 },
{ "flags": 2, "x": 49, "y": 3 },
{ "flags": 2, "x": 70, "y": 3 },
{ "flags": 2, "x": 91, "y": 3 }
],
"sleep": true
},
"layouts": {
"LAYOUT_1x5": {
"layout": [
{ "label": "z", "matrix": [0, 0], "x": 0, "y": 0 },
{ "label": "x", "matrix": [0, 1], "x": 1, "y": 0 },
{ "label": "esc", "matrix": [0, 2], "x": 2, "y": 0 },
{ "label": "c", "matrix": [0, 3], "x": 3, "y": 0 },
{ "label": "v", "matrix": [0, 4], "x": 4, "y": 0 }
]
}
}
}

View File

@ -1 +0,0 @@
# This file intentionally left blank

View File

@ -9,8 +9,3 @@
#define I2C_DRIVER I2CD0
#define OLED_BRIGHTNESS 128
#define OLED_FONT_H "keyboards/1upkeyboards/pi40/lib/glcdfont.c"
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

Some files were not shown because too many files have changed in this diff Show More